CX-02HR Full Automatic Cable Wire Tinning And Crimping Machine Features: 1. The automatic cable wire dipping and crimping machine is based
on the automatic single-head dipping machine for ultra-fine
electronic wires and high-precision wires. The processing of fine
wires can reach AWG#34, and the B side shortest length of tinning
is 8mm. . 2. The automatic crimping and the soldering machine is also called
the automatic soldering machine, stripping tinning machine,
automatic twisting tinning machine adopts Japanese Mitsubishi servo
and SMC pneumatic components to ensure the high precision and long
life of the whole machine. 3. The automatic twisting and tinning machine is operated by a
computer touch screen, and the adjustment of the machine is
intuitive and simple. 4. The computer automatically detects mechanical failures and
displays the cause of the failure, which facilitates rapid
troubleshooting and greatly improves production efficiency. Functions: | Name and model of machine | CX-02HR Full Automatic Cable Wire Tinning And Crimping Machine | | Main Functions | A side cutting, stripping, crimping; B side stripping, twisting,
tinning | | Control method | HMI+Microcomputer | | Take-up system | Computer automatic pre-feeding device, suitable for reel assembly
wire or No-reel assembly wire | | Detective device | With terminal or not, No wires alarm, air pressure detection | | Terminal pressure detection system | Optional installation (applicable for domestic and imported
systems) | | Defective product | Sorting(The head can be equipped with a cutting device) | | Adaptation Mold | opt standard transverse mode, straight mold, Flag figure mold, can
be customized European and Korean Mold | | Crimping Force | 2T/3T mute terminal crimping machine |
Technical Parameter | Voltage | AC220V single phase, 50/60Hz | | Cutting length | 13mm-9999mm | | Adaptable cable | precise wire AWG#20-AWG#32(2 wheels feeding)
big wire AWG#18-AWG#14(4 wheels feeding) | | Adaptable terminal | 0.8/1.0/1.25/1.5/2.0/2.54 transverse and straight mold is shareable | | Capacity | 3,000-3,600pcs/hr(100-600mm, with tinning, no-twisting)
2,200-2,300pcs/hr(100-600mm, with tinning and twisting) | | Stripping Length | A side 0-10mm, B side 0-15mm | | Cutting Accuracy | ±(0.2%*L+1)mm | | Air pressure | 0.5-0.7Mpa(5-7kg/m³) | | Diamension | 1,210*770*1,370mm; Take-up rack: 920*560*1300mm | | Weight | about 400kg±15kg; Take-up: about 80kg |
Device Configuration | Motor | 4 stes of Japan Mitsubishi servo motors + 2 sets of Japan Fuji servo motor
+ 4 sets step motors | | Pneumatic Components | Cylinder, air pipe and air pressure regulating valve are all
provided by Japanese SMC original factory + 7 sets of SMC Cylinder | | Screw | 2 sets of THK+1 set of Kuroda+2 sets TBI | | Sensor | Japanese Panasonic | | Belt | American Gates Brand | | Bearing | Japnese NSK | | Blades | t is made of imported alloy steel, processed by slow-moving wire,
precision ground, and durable |
|
