17AM Motor Thermal Protector Switch 9A Bimetal Klixon Thermostat Switch

Klixon Sensata 17AM Motor Thermal Protector Bimetal Thermostat Temperature control switch

Product Description

The Sensata Technologies 17AM delivers the maximum protection in the smallest package at an excellent price…

Specification

17AM020A5 17AM 020 65℃±5℃

17AM021A5 17AM 021 70℃±5℃

17AM022A5 17AM 022 75℃±5℃

17AM023A5 17AM 023 80℃±5℃

17AM024A5 17AM 024 85℃±5℃

17AM025A5 17AM 025 90℃±5℃

17AM026A5 17AM 026 95℃±5℃

17AM027A5 17AM 027 100℃±5℃

17AM028A5 17AM 028 105℃±5℃

17AM029A5 17AM 029 110℃±5℃

17AM030A5 17AM 030 115℃±5℃

17AM031A5 17AM 031 120℃±5℃

17AM032A5 17AM 032 125℃±5℃

17AM033A5 17AM 033 130℃±5℃

17AM034A5 17AM 034 135℃±5℃

17AM035A5 17AM 035 140℃±5℃

17AM036A5 17AM 036 145℃±5℃

17AM037A5 17AM 037 150℃±5℃

17AM038A5 17AM 038 155℃±5℃

17AM039A5 17AM 039 160℃±5℃

Dimension & Structure

How it works?

The 17AM Thermal protector uses the same snap-action principle of other KLIXON® protectors. The bimetal disc senses both heat and current from the equipment which 17AM is installed on. When the temperature of the disc reaches a predetermined calibration point, the disc snap open the contacts, thus breaking the current path. When the equipment returns to a normal operating range, the 17AM protector resets (close circuit) automatically. 

Please Note :

• During installation, the temperature switch should be completely close to the mounting surface of the tested appliance.
• Do not collapse or deform the plastic / metal shell during installation.
• For metal temperature controller, when using, do not remove the insulating sleeve to avoid electric leakage. Not suitable for working in water.
• Not suitable for air temperature sensing, only applies to contact sensing.

Normally Closed: When the temperature falls to the reset temperature, the thermostat contact can be connected again. (If the reset temperature is not reached, the thermostat contact is also disconnected)

Normally Open: When the temperature falls to the reset temperature, the thermostat contact can be disconnected again. (If the reset temperature is not reached, the thermostat contact is also connected)

Standard Package

100pcs per bag, 20000pcs per carton

Shipping Term:

EXW, DDU, DDP, C&F, FOB

Shipping Methods:

International Express, By Air, By Sea

Selection of the Fuse and Holder Solution

The first step is to answer the following questions:

• Will the fuse need to accessible for replacement?
• How often will the fuse need to be replaced?
• Should the end customer of the appliance have access to change the fuse?
• Should the fuse only be accessible from outside the appliance?
• How much is available to spend on safety and reliability?

5.1.2. Requirements and characteristics

The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:

• IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
• UL-standard no. 512.

• Company warehouse

250Vac