300V Ceramic Surface Mount Fuses / 2410 Fuse Time Delay Blow

Surface mount ceramic chip fuse SMT 1808 2410 SMD fuse

Product Features of Surface mount ceramic chip fuse

1. Small size( 6.1x2.5mm)
2. Conflict free metals
3. Lead-Free and RoHS compliant
4. lnrush with stand capability
5. Wide range of voltage rating (125V/250V/300V)
6. Wide range of current rating (50mA-15A)
7. Excellent environmental integrity
8. Low temperature de-rating
9. Tape and Reel packing for automatic SMT placement 

• Operating Temperature: -55℃ to +125℃ (Consider de-rating)
• Stored condition: at temperature of +10℃~60℃, relative humidity ≤ 75%.
• A:Soldering pot temperature: 260℃ Max; Solder dwell time: <5s (Wave Soldering)
• B:Solder Iron Temperature: 350±5℃, heating time: 1~2s. (Hand Soldering)

Drawing of the 1808 2410 250V 300V SMD fuse

Electrical Characteristics at 25℃

Normal amperes: 250mA 315mA 375mA 0.4A 0.5A 0.63A 0.75A 0.8A 1A 1.25A 1.6A 2A

2.5A 3A 3.15A 3.5A 4A 5A 6.3A 7A 8A 12A 15A (125V 250V 300V)

Note: (1) Permissible continuous operating current is ≤100% at ambient temperature of 23°C (73.4°F)

(2) The current values used for calculating I2T should be within the standard 10In.

(3) The TUV certification only for 250VAC and 125VDC; the CQC, KC certification only for 250V; the cURus certification for all voltage.

(4) 250mA No sand filling

Average Current Curve (I-T Curve)

SMD fuses production machine

Standard Package of 1808/2410 SMD fuses:

Shipping Term:

EXW, DDU, DDP, C&F, FOB

Shipping Methods:

International Express, By Air, By Sea

Selection of the Fuse and Holder Solution

The first step is to answer the following questions:

• Will the fuse need to accessible for replacement?
• How often will the fuse need to be replaced?
• Should the end customer of the appliance have access to change the fuse?
• Should the fuse only be accessible from outside the appliance?
• How much is available to spend on safety and reliability?

5.1.2. Requirements and characteristics

The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:

• IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
• UL-standard no. 512.

• Company warehouse
• Reomax believes in "customer first, sincere cooperation, continuous improvement and innovation", take continuing efforts in manufacture high quality products to meet the demands of users, and our goal is to become the "excellent circuit protection manufacturer".