Automatic Wire Mesh Fencing Welder Multi Head Spot Welding Machine

Wire Welder Automatic Machines Mesh Fencing Welder Multi Head Spot Welding Machine

 
Product Introduction
 

The multi head spot welding machine adopts the advanced structure of foreign equipment and fully combines with a semi-automatic welding equipment developed in the Chinese market that is completely different from the currently used semi-automatic welding equipment by various manufacturers. It completely overcomes the shortcomings of high labor intensity, low production efficiency, complex operation, large spatter, weak welding, high failure rate, and low automation of the original welding machine, and can produce various 6MM series steel bars (electrode replacement is sufficient).

 
 Technical Parameters

Advantages

1. The rebar mesh welding machine adopts a pneumatic electrode that automatically adjusts the pre tightening force, with a relatively constant pre pressure. Compared to spring pre pressing, it has the characteristics of less electrode impact, less electrode wear, and more secure welding points. The spatter during the welding process is further reduced, and the electrode life is further extended.

2. The rebar mesh welding machine adopts a pneumatic electrode that automatically adjusts the pre tightening force, with a relatively constant pre pressure. Compared to spring pre pressing, it has the characteristics of less electrode impact, less electrode wear, and more secure welding points. The spatter during the welding process is further reduced, and the electrode life is further extended.

Major Structure

The multi head spot welding machine is a gantry type frame used to install related components and withstand welding pressure; The welding machine is fixed, and the workpiece moves along the X-axis.

Operation Guide

The environmental conditions, installation location, and workplace for equipment installation should not only comply with the relevant regulations and requirements in the user manual, but also meet the needs of production, facilitate users, and ensure personal safety.

1) Connect to a three-phase four wire power supply, and strictly wire the main line of each motor according to the requirements. If the voltage fluctuation of the power grid is less than 10% of the rated working voltage, a separate power switch (provided by the user) should be set up for the welding transformer power supply.

2) Stay away from equipment that generates strong vibrations to prevent electronic components from malfunctioning.

3) Equipped with clean cooling water source and drainage pipeline, with a water pressure of not less than 0.2MPa.

Reference Pictures