SY-10T/20T/30T Anchorage Force Tester For Checking Strengthening
Concrete Structure SY-10T/20T/30T Anchorage Force Tester
Application:
It is suitable for testing the anchorage force of several of anchor
shank, rebar and expansion bolts, also the pull force of glass
block screen wall. The anchorage test range will be from diameter
6mm to 40mm, and bolt diameter will be from M6 to M27. It is used
to do verification for the anchoraging force, check whether it can
reach the force requirement.
Standard:
GB 50367-2013 Code for design of strengthening concrete structure
GB 50550-2010 Code for acceptance of construction quality of
strengthening building structures
CECS 22:2005 Technical specification for ground anchors
JGJ 145-2013 Technical specification for post-installed fastenings
in concrete structures
Parameters: | Model | | SY-10T | SY-15T | SY-20T | SY-30T | | Manual pump | Piston diameter | 12mm | | Max Pressure | 55MPa | | Weight | 5kg | | Oil cylinder | Max force | 100KN | 150KN | 200KN | 300KN | | Piston stroke: | 60mm | 80mm | | Weight: | 6kg | 11kg | 13kg | | Central hole: | 27mm | 34mm | 45mm | | Digital pressure gauge | Test range | 0-100KN | 0-150KN | 0-200KN | 0-300KN | | Power supply | 9v battery | | Weight | 0.4kg | Anchorage specifications (Optional) | φ6, φ8, φ10, φ12, φ14, φ16, φ18, φ20, φ22, φ25, φ28, φ32, φ36, φ40 | Connector specifications (Optional) | M6, M8, M10, M12, M14, M16, M18, M20, M22, M24,M27 |
Features:
1. It consists of Manual pump, Hydraulic cylinder, Digital pressure
gauge, and High-pressure rubber pipe.
2. The manual pump is of High-Low pressure dual-Radial Piston
design, so it will be suitable for small force testing and larger
force testing.
3. The Hydraulic cylinder adopts hollow automatic reset design.
Hydraulic cylinder has handhold which connects the high pressure
pipe with the two connectors.
|
