Item

Solar Panel Exclusion Clips

Contain

J hook and self locking washers

J hook material

Stainless Steel (Aluminium Material Also Available)

J hook size

2.0x100mm

J hook surface finish

Polish

Washer material

Stainless Steel (Aluminium Material Also Available)

Washer size

38mm

Washer surface finish

Double side black coating surface finish for UV resistant

1. For the J hooks, the material is anneaded stainless steel wire, it is easy to be bent over, it is very improtant for fixing welded wire mesh.

2. For the self locking washers, the material is hardness stainless steel material, it could lock the j hooks firmly and nondeformable.

3. For the self locking washers, we must consider left time, so two side anti-uv black coating for the stainless steel self locking washers could make it more durable.

4. Xiangyi Stainless Steel 304 Material Solar Panel Exclusion Clips will not drill or damage the panels.

5. The installation and remove of the Stainless Steel Solar Panel Exclusion Clips are quickly and easily.

> The QTY needed for one solar panel: A typical solar panel is approximately 1.6m tall and 1m wide, on a typical panel one should use 3 clips on each long edge and 2 on each short edge.

> The QTY needed for one roll: usually the length of solar panel roll is 30m, each roll is allocated with 60 clips.

> The QTY needed for a standard 3kW system (2 rows of 6 panels each - 12 panels total installed in a portrait orientation) : 35 J hooks with self locking washers.

J hook standard package

1. 100 pcs per pp bag, 80 bags per carton

2. 500pcs per pp bag, 16bags per carton

3.1000pcs per pp bag, 8 bags per carton

self locking washer

1. 100 pcs per pp bag, 60 bags per carton

2. 500pcs per pp bag, 12bags per carton

3.1000pcs per pp bag, 6 bags per carton