Technical Data Of The Self Stick Insulation Hangers For HVAC System:

Polyethylene foam with aggresive pressure sensitive rubber resin adhesive.
Service Temperature : -40 deg C to +70 Deg C
Highly Resistant to abrasion, corrosion and moisture.
Confirms to European Directive 2000/53 (Lead, Chromium VI, Mercury, Cadmium free)
10 Minutes 180 degree Peel Adhesion : 30 N/25mm
500 Hour static shear ( Stainless Steel) : 0.8 kg/cm3

Installation Of The Self Stick Insulation Hangers For HVAC System:

1. Install at ambient temperatures above 10° C (preferably between 15 and 25° C)
2. Surfaces should be clean and dry, free of dust, grease, oil and any other loose matter
3. Remove the protective release paper,taking care not to touch the adhesive
4. Place the self adhesive insulation pins in the required position and press the base against

the surface to be insulated
5. Insulation can be impaled immediately and firmly locked with fastening clips or washers,

but maximum strength of adherence is achieved after 24 hours
6. If necessary, cover the pin with a protective nylon cap

Package Details Of The Rockwool Insulation Self Stick Hangers

FAQ Of XIANGYI Metal Products Co.,Ltd.

1. Are you a manufacture or a trader?

We are a manufacture, located in Hebei province, China.

2. Do you support product customization?
Yes, the material, the surface finish, the size, all could be customized.

3. Do you support package customization?

Yes, the package could be customized according to your need.

4. Can i get samples?
Yes, samples for quality confirm are supported.

5. Can you accept small orders?

Yes, for common size, we could accept small orders.