Aluminum Self Locking Clips For Attaching Squirrel Guard Wire To
Solar Panels
Specification details of Aluminum Self Locking Clips
solar panel clips is made of two parts: Metal J hooks and self
locking washers
| wire hooks type | material | thickness | length | surface treatment |
| J hooks | aluminum | 2.5mm | 95mm, 114mm | Phosphating |
| OEM | custom | custom | custom | custom |
Birds Exclusion Hooks | aluminum | 0.6mm | 40mm, 30mm, 30mmx50mm | black uv finished |
OEM | custom | custom | custom | custom |
| material treatment | For the j hooks, the material is must choose anneaded steel wire
/stainless steel wire or soft aluminum wire. it is very important
for the fixing wire mesh. soft wire is easily for bending. For self locking washer, we must choose hardness material to make
sure to lock firmly and nondeformable. at the same time, we must
concider left time, so uv coated for aluminum control washer or
choose stainless steel material to make rustproof.
|
Installation features of Aluminum Self Locking Clips | - No need to drill or damage the panels
- It can easily be trimmed or bent after assembly
- Install and remove quickly and easily
|
images of Aluminum Self Locking Clips
Applications of Aluminum Self Locking Clips
QTY used for installation:The number of clips needed will depend on the solar panel system,
below are the regular QTY.
The QTY needed for one solar panel: A typical solar panel is
approximately 1.6m tall and 1m wide, on a typical panel one should
use 3 clips on each long edge and 2 clips on each short edge.
The QTY needed for one roll: usually the length of solar panel roll
is 30m, each roll is allocated with 60 clips.
The QTY needed for a standard 3kW system (2 rows of 6 panels each -
12 panels total installed in a portrait orientation) : 35 clips.
The distance between the clips: when install the mesh, we clips
every 18 inches/450mm.
XIANGYI COMPANY INTRODUCTION
