Automatic Pan Feeding System For Broiler Floor
Raising Equipment
Automatic Poultry Pan Feeding System Introduction
Broiler floor raising equipment adopts automatic pan feeding
system, feed conveying and dispensing system uses PE pipe and auger
imported from South Africa. The feed conveying speed is fast. It is
easy to maintain and assemble.
Automatic Pan Feeding System Techinical Parameter
1. Vice Hopper | Size: 60x60cm, 60kgs capacity, 1.0mm thickness hot dip galvanized
sheet |
2. Delivery Pipe | Feed pipe: Diameter of feed pipe:Φ45mm Material:hot-dip galvanized sheet pipe with the zinc coating
amount—more than 275m2. Helical spring auger: imported from South Africa, feeding ability:450Kg/h |
3. Feeding Pan | 16 grid 4 feed pans/3m Feed pan capacity: 50-55 broilers/pan |
4. Control feed pan(with sensor) | imported from Germany time delay range: 0-2hours The sensor is usually installed at the end of each feeding line
which controls motor on and off to achieve feed delivery
automatically. The motor will start working and convey feed when
sensor doesn't touch feed, the motor will stop conveying feed when
sensor touchs feed. |
5. Driving motor | Taiwan Wanxin brand Power: 0.75Kw/1.1Kw/1.5Kw, Voltage:380V/220V/others, three-phase/single-phase Frequency:50Hz, AC current |
| 6. Augers | diameter:36mm, high carbon manganese steel |
| 7. Feeding Line Boosting Pulley | Dia: 9cm ;cast iron material |
| 8. Anti-perching system | It prevents chickens from staying on the ground for too long. |
| 9. Lifting Winch | MRS3000, cast iron |
Automatic Pan Feeding Ssytem Equipment Advantages
1. Made of high-resistant injected plastic—PP;
2. Six-position regulator that enables the correct amount of feed
to be delivered according to the age of chickens, just need to
catch two ears in the inner and pull them out adjust up and down;
3. Easy assembly and disassembly system for cleaning the pan;
4. A flange is incorporated to keep the pan suspended for handling;
5. The pan bottom can be disassembled on the ground, which can be
used for day-old chicks;
6. V-shape plate design can reduce feed storage on bottom, so birds
can always eat fresh feed, which also prevents birds staying on the
plate for a long time;
7. The edge of pan plate tilt towards the center, which avoids
waste of feed, the smooth edge prevents birds craws hurting and
make sure safe and comfort feeding;
8. The pan features fins and lips to prevent the feed from falling
into the chicken's bedding and being wasted.
