Industrial Remote Control For Variable Frequency Winch
DHQ-2F1M (DC24V/1 generator, 1 receiver/4 switch values, 2 channels
0-10V), 1 three-position self reset twist switch+1 three-position
self-locking hold twist switch. The former is marked with up and
down straight arrows, the latter is marked with forward and reverse
rotation arrows, 2 speed control knobs (speed control/SPEED),
conventional increase and decrease signs (without Chinese), 1
"ENABLE" button, start (START) Emergency stop (STOP), power
indicator light (POWER), signal indicator light (Signal);
Main function: 1 three-position self reset torsion switch, used for a self reset
mode, which is a forward and reverse mechanism switch quantity
controlled by a jog. One three position self-locking torsion
switch, used for the forward and reverse movements of a mechanism
to maintain the operating switch value. Two speed control knobs,
capable of infinitely adjusting the speed of two forward and
reverse mechanisms, with a speed range of 0-10V.
Product highlight: Good anti-interference performance, with unique identification
codes between each remote control transmitter and receiver,
reaching hundreds of millions of sets, never repeating, and
strictly avoiding mutual interference and potential interference.
And the remote control has up to 50-256 frequency points, and each
set in the same environment can be configured with separate
frequency points. Even if the frequency points overlap, given the
uniqueness of the ID identification code, there will be no impact
on each other, ensuring safety and reliability.
Usage: Can be used for rope saw, grinder, variable frequency motor,
variable frequency winch, variable frequency electric hoist, stone
cutting machine, lawn machine, concrete cutting machine, rope saw
cutting machine, grinder, polishing machine, roller rack, rail car,
electric flat car, variable frequency elevator, variable frequency
crane, etc.
Technical parameters: remote control distance of 100 meters, 250 meters, working
temperature of -35 ° -+75 °, transmitter power supply of 3 No. 5
dry batteries of 4.5V, receiver terminal conventional working
voltage of 12-24V AC/DC, other voltages of AC220V or AC380V, etc.,
can be adapted through external transformer voltage conversion.
Model and configuration instructions: This machine model is
DH-Z2M2B4K (2-way 0-10V), with 1 transmitter and 1 receiver as
standard. The transmitter antenna is built-in, and the receiver is
equipped with an external extended suction cup antenna (1 meter
long feeder), which is adsorbed on the outside of the distribution
box and installed inside the receiver.
