6-way dual speed industrial remote control with button text
identification: UP, DOWN, EAST, West, SOUTH, NORTH, START, STOP,
power indicator light , signal indicator light ;
Main function: Control the equipment to run up, down, east, west,
north, and south in a conventional jog mode, with up and down
interlocking, east-west interlocking, and north-south interlocking.
Each action can achieve fast and slow control, with conventional
pressing to execute slow, and quick double clicking to change to
dual speed. Six dual speed buttons, each corresponding to two
normally open relay outputs at the receiver end. The upper and
lower 2-speed relays can be designed as shared, the east-west
2-speed relays can be designed as shared, and the north-south
2-speed relays can be designed as shared.
Product highlight: Good anti-interference performance, with unique
identification codes between each remote control transmitter and
receiver, reaching hundreds of millions of sets, never repeating,
and strictly avoiding mutual interference and potential
interference. And the remote control has up to 50-256 frequency
points, and each set can be configured with separate frequency
points in the same environment, even if frequency points overlap,
considering ID recognition
The uniqueness of the code will not have any impact on each other,
ensuring safety and reliability.
Usage: crane, overhead crane, crane, electric hoist, gantry crane,
cantilever crane, portal crane, port crane, wharf crane, ship
crane, bridge erecting machine, beam lifter, etc. within the
4-point switching value, as well as elevators, hoists, lifting
platforms, winch, motors, plate shears, sand screeners, concrete
pumps, electric flat cars, industrial furnace doors, winch winches,
etc.
Technical parameters: remote control distance of 100 meters, 250
meters, working temperature of -35 ° -+75 °, transmitter power
supply of 3 No. 5 dry batteries of 4.5V, receiver terminal
conventional working voltage of 12-24V AC/DC, other voltages of
AC220V or AC380V, etc., can be adapted through external transformer
voltage conversion.
Model and configuration instructions: This machine model comes
standard with 1 transmitter and 1 receiver. The transmitter antenna
is built-in, and the receiver is equipped with an external extended
suction cup antenna (1 meter long feeder), which is attached to the
outside of the distribution box and installed inside the receiver.
