Small red mini handheld - welding robot wireless remote control

High strength reliable quality hoist remote control wireless single speed with 10 function switch

Small red mini handheld - welding robot wireless remote control

Up and down and advance of the welding torch, the use of the dial type push button, self-reset mode, each corresponding to 2 control signal output, point mode control; Running, stop, up, down, left, right, P, W, clockwise, reverse, are all point-motion mode control, and each button corresponds to one control signal output at the receiver. In addition, the fault light, button and indicator light on P and W are lit through feedback, and the data interface from the receiver side is connected with the data interface controlled by the device side to upload information in real time and light the indicator in real time. This model welding robot wireless remote control, the overall two-way mode, the transmitter end is small, can be held by a single hand, its own start and emergency stop button, the receiver end is equipped with an external extension antenna, can be built in fixed, signal can be provided according to the need to open 100 meters or 250 meters or 500 meters;

1. Each set remote control has unique ID identification code, even if the same frequency also does not interfere with each other.

2. Strong and stable signals.

3. Up/Down, East/West, South/North can be set to suppress each other.

♦ More Smaller & More lighter

Default configuration

1. Transmitter * 1 piece

2. Receivers * 1 piece

3. The receiver comes with 1m cable connector

4. Operation and Maintenance Manual

Attentions

1. Due to transportation requirements, the product is not equipped with battery.

2. When you order, please remark the voltage, DC12V/24V or AC220V/380V.

Warranty & Service

1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.