2000m Wireless Tower Crane Remote Control 433MHz Front And Rear 2 Speed

 DHM-8FD Up and down 3 speed, left and right 4 speed, front and rear 2 speed tower crane wireless remote control

Up and down 3 speed, left and right 4 speed, front and rear 2 speed tower crane wireless remote control, there are 4 types, 2 of which are button type, and the other 2 are double rocker type;

Type 1 (standard)

The up, down, left, and right front and rear are two-speed button type, each button is a two-stage node, that is, two speed control button types, when it is halfway down, it is 1 speed, corresponding to the 1 speed relay on the receiver side, press At the end, it is 2 speed, corresponding to the receiver side 1 speed and 2 speed relays are both closed and turned on. At this time, it is fast. This type realizes 2 speed control in each direction.

Start+emergency stop knob is a necessary function button. Start is to start the transmitter's local power supply, and at the same time, it corresponds to the connection of the main output control loop of the receiver. When the emergency stop is photographed, the main output control loop of the receiver is instantly cut off. , And cut off the total power supply of the controlled end equipment at the same time to ensure safe and reliable operation.

product model DHM-8FD.

Type two (customized type)

It is also a push-button type. Originally, there are several speeds to achieve control of several speeds. Continuous pressing of the button can achieve the delayed acceleration function, such as automatically increasing one level of speed every 5 seconds, and 2 speeds correspond to the output of 1 speed and 2 speed relays. 3 speed corresponds to 1 speed 2 speed 3 speed relay output, 4 speed corresponds to 1 speed 2 speed 3 speed 4 speed relay output.

The layout of the buttons is as follows

up, down, automatic/manual

East, West, high/low speed

South, North, lighting on/off

1, 2, lock/unlock

There is also a start + emergency stop knob layout on the top of the transmitter.

Automatically, it means that pressing the button continuously can achieve the purpose of delayed acceleration;

In manual mode, you can quickly click twice to achieve 2-speed control, and quickly click 3 times to achieve 3-speed control;

At high speed, as long as the button is operated, it is high-speed action, such as up and down action, as long as the operation is 3 speed, front and rear action, as long as the operation is 2 speed action, left and right swing, as long as the operation is 4 speed action;

At low speed, as long as the button is operated, it is high-speed action, such as up and down action, as long as the operation is 1 speed, front and rear action, as long as the operation is 1 speed action, left and right swing, as long as the operation is 1 speed action;

The "lock/unlock" button is used to temporarily lock the panel button function when walking away temporarily to avoid the possibility of misoperation due to accidental touch or falling to the ground. In addition, it can be combined with the emergency stop knob to achieve the same type of transmitter or receiver The function of temporary code matching of the transmitter, or the pairing operation of a newly equipped transmitter or receiver, etc.;

Start+emergency stop, start corresponding to the transmitter's local power supply, at the same time the corresponding receiver main output control loop is connected, emergency stop shooting, can cut off all outputs of the receiver, emergency stop actually corresponds to 2 relay outputs, including 1 Normally open point + one normally closed point relay, normally use normally open point, normally closed point as backup;

This machine model DH-Z6FD (DC24V/250m/1 send and 1 receive/relay output), other voltages are equipped with external transformer adaptation!

Our products are different from the plastic remote controller on the market. The stainless steel remote control is more strong and durable.

1. The Joystick is more convenient and sensitive. 5-node paragraph joystick, optional 5-speed, easy to operate.

2. Stable control signals will ensure no interference during use. The unique signal is encrypted and coded, and there is no interference when using multiple sets of remote controllers in an environment.

3. The transmitter is sealed with silicone rubber ring, which is good waterproof.

♦ More Options More Function
The function can be customized according to your requirements, please contact the supplier.

Default configuration

1. Transmitter * 1 piece

2. Receivers * 1 piece

3. Strap * 1 piece

4. Free Joystick * 1 piece

5. The receiver comes with 1m cable connector

6. Operation and Maintenance Manual

Attentions

1. Due to transportation requirements, the product is not equipped with battery.

2. The function can be customized according to your requirements, please contact the supplier.

 
Warranty & Service

1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.
 
Packing & Delivery