Remote Control 180hp 132KW Off Grid Solar Pump Inverter Built In MPPT
|
|
132KW solar off grid hybrid inverter work with water pump in built MPPT
VEIKONG VFD500-PV series Solar Pumping Inverters
1. VEIKONG solar water pump system is essentially an electrical pump system in which the electricity is provided by one or several PhotoVoltaic (PV) panels. A typical solar powered pumping system consists of a solar panel array that powers an electric motor, which in turn powers a bore or surface pump.
2. What is solar pump inverter? A solar inverter or PV inverter,solar pump inverter,solar pump controller,solar water pump inverter,solar pump drive,solar water pump controller,solar mppt vfd,solar mppt frequency inverter,solar frequency inverter,solar pump vsd,solar frequency inverter,solar vfd are all key words IT is a type of electrical converter which converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network.
It is able to convert DC voltage coming from solar panels into AC voltage for powering any pump driven by a three-phase motor. Pump speed is constantly adapted to available solar irradiation thus maximising the amount of pumped water and making possible operation even in conditions of low sunlight. It also offers complete pump protection against surges, overloads and dry running.
Details and features
Power range: 0.75kw-75kw 220VAC
1. Advanced MPPT Technology: Maximum MPPT Efficiency: 99%;
Electrical Specifications and Power degree
Mode Range
Connect wire diagram
FAQ 1. How to achieve Automatic start after stop? If it is controlled by keyboard no need to set any parameter. If
you want to control by external switch As the default control mode is keypad control, First set P00.06=1
and use a wire or switch to connect com and DI1,When the switch is closed, the drive run, when the switch is open,
the drive stop 2. How to use a float in the water tank to stop the pump if the
tank is full? If your float signal is digital signal Use float switch to short DI
3 and com ,see diagram 1.3 3.Use level probe in the well for protection against dry running First solution: See self learning of dry run Second solution: do it manually Set P24.13=30%-60%(as per real
empty load current percentage based on rated current) and P24.14 P24.16 and P23.21 Third solution: If your sensor is digital switch ,just short D4 and
com Fourth solution: If your float signal is Analog signal, Connect Ai2
and 10V and GND and set P41.00=23 and P41.03-P41.06 4.How to set minimum frequency ( for example) 30hz and maximum 50HZ Set P47.05=30HZ and 47.06 to some time and 47.07 to some time.
Please refer to details of P47.05-47.07 5.If pump is 60HZ frequency, how to set max frequency? Notice: If your motor rated frequency is 60HZ First solution for
you, P01.06=P01.08=P11.05=60HZ. Quick setting and easier way: you should set P00.11=02 If your
motor is three phase; if your motor is single phase with capacitor ,set P00.11=22;If your motor is single phase
without capacitor ,set P00.11=32
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: 132KW Off Grid Solar Pump Inverter 180hp Off Grid Solar Pump Inverter 180hp solar ac pump controller | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
VEIKONG Solar Pump Inverter 99.9999% MPPT Efficiency for Irrigation Solar Optimization |
|
VEIKONG High-Efficiency 99.999% MPPT Solar Pump Inverter for Optimal Energy |
|
99.9999% MPPT Made In China Solar Water Pump Controller Support GPRS Remote Control |
|
VEIKONG Solar Water Pump Controller AC Motor Wall Or Rail Mounting Output 220VAC/380V |
|
Efficiency Solar Pump Controller with MPPT PID Mode AC Motor 160-800V DC Voltage Range |
|
Veikong Smart Solar Pump Inverter With GRPS And Wireless Connectivity |