Remote Monitoring Single Phase Solar Pump Inverter with GPRS Module
|
Solar pumping controller 2.2kw 220v for single phase pump dc-ac power
Key Features:
8, Support PMSM pump, and IP20 or IP65 level.
Electrical Specifications:
Product Application: Customer feedback:
Power Range:
1. Use level probe in the well for protection against dry running First solution: See self learning of dry run Second solution: do it manually Set P24.13=30%-60%(as per real
empty load current percentage based on rated current) and P24.14 P24.16 and P23.21 Third solution: If your sensor is digital switch ,just short D4 and
com Fourth solution: If your float signal is Analog signal, Connect Ai2
and 10V and GND and set P41.00=23 and P41.03-P41.06 2. How to set minimum frequency ( for example) 30hz and maximum
50HZ Set P47.05=30HZ and 47.06 to some time and 47.07 to some time.
Please refer to details of P47.05-47.07 3. If pump is 60HZ frequency, how to set max frequency? Notice: If your motor rated frequency is 60HZ First solution for
you, P01.06=P01.08=P11.05=60HZ. Quick setting and easier way: you should set P00.11=02 If your
motor is three phase; if your motor is single phase with capacitor ,set P00.11=22;If your motor is single phase
without capacitor ,set P00.11=32 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: 220V 4kw Solar Inverter 2.2kw Solar Pumping Controller 10.6A 4kw Solar Inverter |
![]() |
220v 1HP 2HP 3HP 5HP 10HP Single Phase VEIKONG Solar Pump Inverter Hybrid Inverter |
![]() |
Lcd Single Phase Solar Pump Inverter 220vac/380v Input Voltage |
![]() |
220v Single Phase Solar Pump Inverter 2.2kw 3hp 4kw 5hp |
![]() |
220volt 2.2kw 4kw Solar Vfd Single Phase With Led Display |
![]() |
Remote Monitoring of VFD500-PV Single Phase Solar Pump Inverter with GPRS Function |
![]() |
Submersible Solar Water Pump Inverter Single Phase VFD 0.75KW To 710KW |