Corrosion Resistance Ferrite Stainless Steel Targets Tube Shaped ISO9001

Stainless Steel Tube Target 155OD*125ID*888L

Stainless steel is often divided into: martensitic steel, ferrite steel, austenitic steel, austenitic - ferrite (duplex) stainless steel and precipitation hardening stainless steel. In addition, can be divided into: chromium stainless steel, chromium nickel stainless steel and chromium manganese nitrogen stainless steel. And special stainless steel for pressure vessels.
weldability
The requirements for welding performance are also different for different product uses. A class of tableware on welding performance generally do not require, even including some pot enterprises. But the vast majority of products require good welding performance of raw materials, such as second-class tableware, thermos cups, steel pipes, water heaters, drinking machines and so on.
Corrosion resistance
The vast majority of stainless steel products for corrosion resistant performance is good, like a, 2 kinds of tableware, kitchen utensils and appliances, water heaters, water dispensers, etc., some foreign businessmen on corrosion resistance of products also do experiment: in NACL aqueous solution heated to boiling, after a period of time out solution, wash and drying, weight loss, to determine the degree of corrosion (note: When the product is polished, Fe content in the emery cloth or sandpaper will lead to rust spots on the surface of the test.)
Polishing performance
Stainless steel products in today's society are generally polished when the production of this process, only a few products such as water heater, water dispener liner, do not need to be polished. So this requires that the polishing performance of raw materials is very good. The main factors affecting the polishing performance are as follows:
Surface defects of raw materials. Such as scratches, pitting, pickling and so on.
② The problem of raw materials. The hardness is too low, it is not easy to shine when polishing (BQ is not good), and the hardness is too low, it is easy to appear orange peel phenomenon on the surface when deep drawing, thus affecting BQ. BQ with high hardness is relatively good.
(3) After deep drawing, small black spots and RIDGING will appear on the surface of the products with great deformation, thus affecting the BQ property.

Advantages:
1, high conductivity
2. Good thermal conductivity
3, good weldability
4, excellent plasticity and ductility
5, excellent cold working performance

6. Customized according to the drawings required by customers