Extruded Magnesium Alloy Rods 98% Purity Az61 Az91d Az80
|
Detailed Product Description
|
Extruded Magnesium Alloy Rods 98% Purity Az61 Az91d Az80 We43 Zk60
Introduction: Thermal squeeze is the primary plastic deformation processing
process of deformation magnesium alloy. Like the squeezing of
Transformers aluminum alloy, magnesium alloy extruded can be
squeezed forward or reverse. It can also be produced with dual
-motion extruders. It can be squeezed with a horizontal type or a
stand -up extrusion machine. In short, all equipment for
squeezing-aluminum alloy semi-finished products can be used to
produce magnesium alloy materials, but the process parameters are
different, and the supporting equipment is different from the
fine-telled equipment. Most of the magnesium is produced with extrusion process. The
products are tube, stick, and shape materials. The squeezing is
performed at a certain temperature. The magnesium alloy extrusion
process and equipment are equivalent to the production of aluminum
alloy extrusion materials. All deformation magnesium alloys can be
used to produce squeezing materials: AZ31B, AZ61A, ZK10A, etc. used
to squeeze the pipes; The production profiles are mainly AZ31B,
AZ61A, AZ80A, ZK10A, ZK30A, ZK60A, etc.
Parameter:
Feature of Magnesium Rods: 1. The relative ratio of magnesium alloys is the highest -intensity
(ratio of strength to quality). The ratio of rigidity (ratio to
quality) is close to aluminum alloy and steel, which is much higher
than engineering plastics. 2. Within the elastic range, when the magnesium alloy is impacting
the load, the absorbed energy is half larger than that of aluminum
alloy, so the magnesium alloy has good shock resistance and noise
reduction performance. 3. Magnesium alloy melting point is lower than the melting point of
aluminum alloy, and the die -casting molding performance is good.
Magnesium casting is comparable to aluminum alloy castings,
generally 250MPa, up to 600 MPA. The extension rate is not much
different from the aluminum alloy. 4. Magnesium alloy also has a good electromagnetic shielding
performance, radiation resistance, and can be recycled and reuse of
100%. 5. Magnesium alloy stability High -pressure casting is highly
accurate, and high -precision mechanical processing can be
performed. 6. Magnesium alloy has good die -casting performance, and the
minimum thickness of the die -casting wall can reach 0.5mm. Adapt
to all kinds of die castings in manufacturing cars. Standard:ASTM B843-1995,GB/T21448-2008,GB/T17731-2009 Production-Quality Control Quality Control in our foundry begins on the foundry floor, where
the first line of inspection is the casting and molding crew, our
lab technicians inspectors and managers completes the quality team.
Our quality control staff carefully monitors raw material, core
materials,packaging and all aspects of production.
|
|||||||||||||||||||||||||||||||
| Product Tags: Extruded Magnesium Alloy Rods Az80 Magnesium Alloy Rods 98% Purity Magnesium Alloy Rods |
Related Products
|
Customized 6mm Magnesium Alloys Welding Wire Hot Rolling |
|
AZ61 Metallic Magnesium Alloys Rod Bar Hot Rolling |
|
Az31b Magnesium Alloy Rod 20mm Extruded Mg Alloy Bar |
|
Extruded Magnesium Alloy Rods 98% Purity Az61 Az91d Az80 |
|
Dissolvable Magnesium Alloys Rod Bar 300mm Semi Casting |
|
Az31 Magnesium Alloys Tube With Diameter 100mm Good Damping Performance |
Email to this supplier