Cooled MCT Infrared Detector 320x256 / 30μM For Optical Gas Imaging

Cooled MCT Infrared Detector 320x256 / 30μM For Optical Gas Imaging 

F1.5 320x256 / 30μm MWIR MCT Cooled Infrared Detector for Gas Lead Detection

C330M-B3T MWIR MCT cooled infrared detector is specially designed for Optical Gas Imaging detection applications. The customized spectral range is from 3.2~3.5μm which is just for the working range of Volatile organic compounds, or VOCs. The capture of F1.5 enables even clearer imaging details so as to “see” the invisible leaked gas for any further harm on the environment.

- Resolution: 320x256

- Pixel Pitch: 30μm

- High Sensitivity

- Compact Design

- Lightweight

- Low Power Consumption

 
The C330M MWIR cryogenically cooled infrared detector is widely used many areas such as Remote Monitoring System, Flight Vision Enhancement System, Multi-sensor Payload etc.
 

1. What is thermal sensitivity?

Thermal Sensitivity, also named NETD (Noise Equivalent Temperature Difference), is a key parameter for evaluating medium wave (MWIR) and long wave (LWIR) thermal imaging cameras. It is directly related to the clarity measured by the thermal imager. It is a numerical value representing the signal-to-noise ratio of the temperature difference and measured in milliKelvins (mK). The smaller the thermal sensitivity value, the higher the sensitivity and the clearer the image.

2. What are the applications of thermal imaging?

Temperature measurement and all-weather imaging are two basic functions of infrared thermal imaging technology. Products developed based on these two technologies are widely used in security & monitoring, UAV payloads, industrial inspection, firefighting, predictive maintenance, ADAS, epidemic prevention, AIoT etc.