single axis sun tracking system for solar panels single axis sun tracking system for solar panels Working principles: Compared with the traditional bracket system with fixed inclination
angle, single axis sun tracking system for solar panels has obvious advantages of reliability and cost performance,
stronger sand prevention ability and fault identification ability,
more flexible response, and the power generation capacity increases
by 10%-20%. During the tracking stage, the single axis sun tracking system for
solar panels system will automatically issue instructions
according to the tracking range to control the operation of the
electric actuator, and adjust the tracking Angle every once in a
while (so as to make the photovoltaic modules always align with the
position of the current sun.Under bad weather conditions, the upper
computer communication system tells the control system there is a
strong wind weather, sends out instructions, tells the control
system, the control system pushes the motor, and the bracket makes
corresponding actions to avoid bad weather.
single axis sun tracking system for solar panels Functions: 1. Adopt the form of self-power supply, without external power
supply; 2. Excellent compatibility with all the solar modules available on
the market, framed, frameless and bi-facial. 3. Slew drive design, with high transfer efficiency and good
environmental adaptability, the drive unit can be maintained free
for 25 years; 4. Free obstacles among trackers in N-S direction, easy to maintain
and clean. 5. Design configured with one single set of controller, which
ensures point-to-point real-time monitoring, easy to detect fault
points in time and reduce output loss. 6. Independent 2P module design, which reduces the quantity of
posts and the installation cost significantly. 7.Max terrain tolerance in N-S direction up to 15%. 8. Independently developed MCU microcomputer control system; Advantages: 1. Max terrain tolerance in N-S direction up to 15%. 2. Excellent compatibility with all the solar modules available on
the market, framed, frameless and bi-facial. 3. Independent 2P module design, which reduces the quantity of
posts and the installation cost significantly. 4. Free obstacles among trackers in N-S direction, easy to maintain
and clean. 5. Design configured with one single set of controller, which
ensures point-to-point real-time monitoring, easy to detect fault
points in time and reduce output loss. Technical Parameters of single axis sun tracking system for solar panelsTechnical parameters | Tracking Range | 士 60° | Driving System | Slew drive, 28VDC motor | Modules per Tracker | Max.90 modules per tracker | System Voltage | 1000 V or 1500 V | Ground Coverage Ratio | ≥ 25% | Foundation Options | All foundation types | Terrain Adaption | Up to 20% N-S slope | Structure Material | Hot dip galvanized steel | Power Consumption | 0.2-0.5kWh/day | Power Supply Mode | Powered by PV strings, back-up lithium battery | Standard Design Wind Speed | 18m/s | Module Supported | All commercially available modules | Operation Temperature | -40℃ - 70℃ | Control Algorithm | Astronomical algorithms + Tilt sensor close loop | Tracking Accuracy | ≤ 1° |
About us: Good future solar has a professional management team, we have gains
rich experiences on the solar power generation, and the designing,
manufacturing, commissioning of the single axis tracking system.
|