28VDC Solar Sun Tracker Hot Dip Galvanized Steel 1P Tracker

Robust Solar Sun Tracker Hot Dip Galvanized Steel
 

Working principle:

It just makes sense that the PV panel pointed directly to the sun is going to make more electric power than one that is not facing it. Unfortunately, a solar panel on a roof-mounted array or other fixed rack is generally not going to be perpendicular to the sun's rays. As the Earth rotates and the sun moves across the sky, a fixed panel will produce more or less power depending on the time of the day and the season. However, by mounting panels on a rack that rotates to track the sun's movement, solar panels can produce significantly more power than when they are set in a fixed position. These moving racks are known in the solar business as"solar sun trackers", and they can increase overall production between 15% and 25%.

Technical Parameters of Robust Solar Sun Tracker Hot Dip Galvanized Steel

Functions

1. Compatible with Larger Modules

Solar Tracker-1 P is designed to reduce LCOE with larger modules. Compatible with 210 mm wafer size.

2. Innovative Super Tracker Technology

According to real-time weather and actual terrain conditions, Smart algorithm dynamically optimizes tracking angle, increases receiving radiation and reduces shading loss. UP TO 8% yield gain.

3. Free obstacles among trackers in N-S direction, easy to maintain and clean.

4. Design configured with one single set of controller, which ensures point-to-point real-time monitoring, easy to detect fault points in time and reduce output loss.

Advantage:
1. Less electric control and driving unit, lower failure rate;

2. Strong adaptability, simple installation, convenient operation and maintenance;

3. Tracker could adjusts solar panels into horizontal in strong wind condition.

4. More reasonable wind resistance design;

Through the wind tunnel test, a more reasonable wind resistance mechanism can be obtained, which can more effectively guarantee the 25-year life of the power station.

5. Minimum number of drives for every MWp installed.

6. Minimum energy consumption.

7. Compatible with different foundation solutions: ramming, micropiles, concrete pads, predrilling, screw pile.

8. Compatible with all PV modules (framed, glass-glass, thin-film, bifacial)

9. Preassembled joints and components.

10. Minimum installation time, fast & simple.