Hot Dip Galvanized P2677 Clevis Hanger and Beam Clamps
Products:Beam Clamp
Malleable Beam Clamps are secured to the outside of an I-beam,
girder, or other structural member to provide a mounting base for
conduit hangers or threaded rod.
Features:
1. Material: Cast Malleable Steel with hardened cup point set screw
and jam nut;
2. Finish: Electro-galvanized finish for enhanced corrosion
protection, Available in hot dip galvanized finish (special order);
3. Features: May be used on top or bottom flange of the beam.
Beveled lip allows hanging from top flange where clearance is
limited. may be installed with the set screw in the up or down
position. Offset design permits unlimited rod adjustment by
allowing the rod to be threaded completely through the clamp. The
rear window design permits inspection of thread engagement;
4. Function: For attachment to structural shapes requiring wider
throat especially under roof with bar joist construction. This
clamp may be used with the set screw in the up or down position;
5. Note: Do not over tighten set screw.
Applications:For attachment to structural shapes requiring wider throat
especially under roof with bar joist construction. This clamp may
be used with the set screw in the up or down position.
Certification:
Material:Carbon Steel, Malleable Iron and Forged Steel are used in
the manufacturing of beam clamps and accessories. Stainless steel
and other materials are available.
| Part No. | Fmax(kN) | H1 (mm) | G (mm) | S (Bolt&Nut) | PCS/Box | Surface Finished |
| BC-M6 | 1.1 | 18 | M6 | M6 | 50 | EG/HDG/SS304/SS316 |
| BC-M6-T | 1.1 | 18 | 7 | M6 | 50 | EG/HDG/SS304/SS316 |
| BC-1/4 | 1.1 | 18 | 1/4 | 1/4 | 50 | EG/HDG/SS304/SS316 |
| BC-1/4-T | 1.1 | 18 | 7 | 1/4 | 50 | EG/HDG/SS304/SS316 |
| BC-M8 | 1.1 | 18 | M8 | M8 | 50 | EG/HDG/SS304/SS316 |
| BC-M8-T | 1.1 | 18 | 9 | M8 | 50 | EG/HDG/SS304/SS316 |
| BC-5/16 | 1.1 | 18 | 5/16 | 5/16 | 50 | EG/HDG/SS304/SS316 |
| BC-5/16-T | 1.1 | 18 | 9 | 5/16 | 50 | EG/HDG/SS304/SS316 |
| BC-M10 | 2.4 | 20 | M10 | M0 | 50 | EG/HDG/SS304/SS316 |
| BC-M10-T | 2.4 | 20 | 11 | M10 | 50 | EG/HDG/SS304/SS316 |
| BC-3/8 | 2.4 | 20 | 3/8 | 3/8 | 50 | EG/HDG/SS304/SS316 |
| BC-3/8-T | 2.4 | 20 | 11 | 3/8 | 50 | EG/HDG/SS304/SS316 |
| BC-M12 | 3.1 | 27 | M12 | M12 | 25 | EG/HDG/SS304/SS316 |
| BC-M12-T | 3.1 | 27 | 13 | M12 | 25 | EG/HDG/SS304/SS316 |
| BC-1/2 | 3.1 | 27 | 1/2 | 1/2 | 25 | EG/HDG/SS304/SS316 |
| BC-1/2-T | 3.1 | 27 | 13 | 1/2 | 25 | EG/HDG/SS304/SS316 |
Product Show:
Package:
FAQ:
Q1: Are you manufacturer?
A: Yes,we are factory ,We have stamping and injection factories.
Q2: What services can we offer?
A: We can OEM and ODM,We have a strong design team,we can provide
drawing.
Q3: What information need for quotation?
A: For example: 1: what material(carbon steel/Q235/SS304/SS316)2: what size do you need ?
3: what surface finished( zinc plate/HDG/powder coating/copper
plated)?
