10-50ton Boat Hoist Crane With Wind Speed Protection System 18-35m Span

BH Models Boat Hoist, Wind Speed Protection System, Danfoss Or Rexroth Hydraulic System

Product Description

It can transfer boats that exceed its height. According to the different requirements of customers, the marine crane can handle different tons of ships or yachts from the shore, can be used for shore maintenance, and can also put new boats in the water. It uses soft and firm straps to lift boats, yachts; it never hurts the surface. It also quickly puts the boats in sequence with little gap between every two boats. The electrical system adopts PLC frequency adjustment, which can easily control each mechanism. Control method: cabin control/remote control or cabin control + remote control.
Rubber tire marine cranes are widely used in marine factories, outdoor repair shops or lifting yachts, with stable performance, high efficiency, convenient maintenance, good safety, instruction manual and overload protection device to ensure the safety of operators and equipment to the greatest extent.

​​Drawing and Specification

Feature

1. For the crane traveling, this crane can move in diagonal direction, this boat and yacht handling crane also can steer in 90 degree and put the boat in any designated position according to requirements.

2. This crane can be adjusted the width of the main girder according to the boat in case to handling different side boat.

3. This yacht handling crane is of low expense, high performance, easy to operate and maintenance and so on.

4. Low cost on the daily operation, it adopts the soft and firm belt to ensure there is no harm to the boat when hoisting.

5. This boat crane can make the boat in order quickly; it also can adjust the gap between each boat according to different condition.

Package and Delivery

• 180days for production, the port loading and custom cost about 6 days,
• The sea transportant takes 15days to 35days, the loading, transport and installation takes about 10days to 20days

• Total time: 210days to 241days

Installation and Commissioning

FAQ

1.Is your product customized?
Thanks for your question. Yes, because the working condition are different, all our products are customized depending on detail requirement! So if you give us more information about the lift capacity, span, lift height, power source and other specials, we will give you a very quick and accurate quotation.

2. What’s the information should I provide when inquiry?
Thanks for your question. The more information you provide, the accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, power source or other specials you give us will be more appreciated.

3. How many operating methods for my selection?
Thanks for your question. The standard operating methods we provide is pendent controller with push buttons. Meanwhile, we can also provide the remote control with push buttons and the cabin (space capsule seat) control with joystick. You can choose any of them, just tell us!

4. What’s the max lifting capacity of the crane?
Thanks for your question. The max Lifting capacity of our standard crane are up to 450 ton. If this can’t satisfy your working requirement. Please contact us for special customized.

5. The space of my workshop is limited, can the crane ok for mine?
Thanks for your question. For low headroom workshop, we have the Special products. The detail dimension please consult our professional engineer.

6. Can the crane work in hazardous environment?
Thanks for your question. This type product is just for application in general manufacturing workshop. For hazardous environment, please consult our professional sales manager.

7.Do your side can provide lift tools?
Thanks for your question. Yes, we can provide any kinds of lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement's.