Hydraulic Test Pump For Pressure Test 0 - 6.0mpa Light Structure

high demand products Hydraulic test pump for pressure test for sale QXB-60

Description

1. Small and light structure, easy to carry.
2. Universal spray gun can make cleaning easy and can be cleaned almost everywhere.
Uses: air conditioning cleaning, wall cleaning, vehicle engine cleaning, agricultural tools and machinery cleaning, spraying pesticides and pestides, printing machinery cleaning, pipeline cleaning and dredging, food processing equipment and kitchen cleaning.

How to use and problems

1. If the water pump cannot absorb water, please add a certain amount of water from the water inlet pipe to the water pump.
2. Prevent air from entering the water pump.
3. After the pressure test is over, loosen the pressure adjustment knob, add a little 20# oil, and keep it loose. At the same time, turn on the power and add oil at the water inlet to run for half a minute.
4. It is strictly forbidden to start the machine without water, otherwise the sealing ring and piston ring will be easily damaged.
5. The water source should not have impurities, otherwise the seal will be easily stuck, which will cause the phenomenon of no water absorption.
6. Water leakage at the lower part of the pump body means that the sealing ring is damaged, and the sealing ring must be replaced.
7. Please use the pressure regulating button correctly, do not turn the pressure regulating knob to the end, otherwise the high pressure will cause high pressure damage to the meter, etc.
Be sure to loosen the red pressure regulating valve before turning it on! so as not to explode the pressure gauge

PACKING
We put pp fittings into nylon bags then cartons outside. We also packed other pipe fittings with plastic bags.

SHIPPING
For sample orders, we can ship it by international express, such as DHL, FEDEX, TNT and China EMS.
For bulk orders, we support air cargo and sea shipping, our factory are near from Shanghai port and Ningbo port, and we can transfer goods to port within 24 hours.

Our service:

1. Quick, efficient and professional response within 24 hours,
2. 15 years manufacturing experience in plastic pipe &fitting field.
3. Reasonable price and shorter production cycle.
4. Technical support and solution by chief engineer.
5. Strict quality control system and team
6. Full range of pipe& fitting products for choice
7. OEM or ODM services both available for our company
8. Accept sample order before mass order
9. On-time delivery, and 24 hour after-sales service