Hot Dipped Galvanized Hexagonal Woven Steel Gabion Mesh 8x10 Double
Twisted Gabion Mesh Introduction:Metal Gabion-Netting is metallic wire mesh rock fall netting used
to prevent rock and debris from falling on to road and railways,
since the double-twist, hexagonal-woven mesh does not unravel when
some wires break. This is achieved by joining together rolls of
mesh fabric with lacing wire and using it as a blanket to cover
slopes obstructing rock falls. Fractured stones are trapped and
confined against the slope should isolated wires fatigue from
prolonged stress. This solution can also help in establishing and
protect infrastructure.Product name | Gabion Mesh | Color | Silver/Green etc. | Delivery Time | 5-25days | Type | Welded/Twisted | Gabion Size | 1.5m*1m*0.5m | Mesh Type | 80mm*100mm | Wire Diameter | 2.7mm | Feature | Crossion Resistance | Application | for Bridge Protection | Packing | Boundle/Pallet |
Gabion Mesh Specification: Mesh Type | Mesh Type | Nominal Dimension D Values | Tolerances | 6 x 8 | 64 mm [2.50 in.] | ±10 % | 8 x 10 | 83 mm [3.25 in.] |
Typical Gabion Basket Sizes | Length, m | Width, m | Height, m | Number ofCells, each | Volume, m³ | 2.0 | 1.0 | 1.0 | 2.0 | 2.0 | 3.0 | 1.0 | 1.0 | 3.0 | 3.0 | 4.0 | 1.0 | 1.0 | 4.0 | 4.0 | 2.0 | 1.0 | 0.5 | 2.0 | 1.0 | 3.0 | 1.0 | 0.5 | 3.0 | 1.5 | 4.0 | 1.0 | 0.5 | 4.0 | 2.0 | 2.0 | 1.0 | 0.3 | 2.0 | 0.6 | 3.0 | 1.0 | 0.3 | 3.0 | 0.9 | 4.0 | 1.0 | 0.3 | 4.0 | 1.2 |
Gabion Mesh Standard:
Heavily zinc-coated steel wire conforming to ASTM A 641, Class 3
coating, soft temper;
Zn-5Al-MM-Coated steel wire conforming to ASTM A 856/856M, Class 3,
soft temper;
The same type of metallic-coated steel wire as above, but with an
additional PVC coating extruded onto the metallic-coated steel
wire;
l Aluminum-coated steel wire conforming to ASTM A 809, soft temper;
The most popular wire diameter for gabion baskets is 2.7mm, 2.2mm
for revet mattress. Gabion Mesh Feature:How to install welded gabion box?
1. Ends, diaphragms, front and back panels are placed upright on
the bottom section of wire mesh.
2. Secure panels by screwing spiral binders through the mesh
openings in adjacent panels.
3. Stiffeners shall be placed across the corners, at 300mm from the
corner. Providing a diagonal bracing, and crimped over the line and
cross wires on the front and side faces. None are needed in
interior cells.
4. Gabion box filled with graded stone by hand or with a shovel.
5. After filling, close the lid and secure with spiral binders at
the diaphragms, ends, front and back.
6. When stacking tiers of the welded gabion box, the lid of the
lower tier may serve as the base of the upper tier. Secure with
spiral binders and add pre-formed stiffeners to exterior cells
before filling with graded stones. Gabion Mesh Application:Erosion control
Riverbank and bed control
Erosion control of riverbank and water reservoirs
Landfill recultivation
|
