Mill Galvanized coating ASTM A641 Standard bank strong rooms
Construction Wire Mesh Construction Wire Mesh Introduction: Masonry ladder&truss type reinforcement mesh Raw material:low
carbon steel wire,stainless steel wireThe mesh can be electro galvanized or hot dip galvanized after
welding,it mainly have two type,ladder type and truss type.The wire diameter is from2.5mm to 6mm.
Brick Wall Reinforced Mesh, Used in Building Surface, Wall, Ground
and Bridge.
Customized specifications and sizes are accepted.MATERIAL : Iron wire & stainless steel wire 304/316
Qijie metal joint reinforcement products conform to:
ASTM A951 (Standard Specification for Steel Wire for Masonry
Joint Reinforcement)
Our products pass the testing of ASTM A951,We tested in USA .
Tensile Strength - 80,000 p.s.i. | Yield Point - 70,000 p.s.i.
minimum
Zinc Coating:
Mill Galvanized coating: (0.1 oz/ft²)
Hot-Dip Galvanized after fabrication: (1.5 oz/ft²)
Wire Diameter:
9 gauge or 3/16ӯ
Side Rods and Cross Rods available in any combination of the above.
Cross Rods welded 16” O.C.
Block Size: Standard Sizes: 4” wall - 16“ wall.
Other widths available on special request.Masonry Block Wire Ladder has the continuous lengths of joint
reinforcement that are embedded into the horizontal mortar joints
of masonry walls. Joint reinforcement has long proven to be
necessary for superior performance of masonry wall construction. Variety: Truss-Mesh Reinforcement
Ladder-Mesh Reinforcement Available at: hot dipped galvanized, electro galvanized or
stainless steel The specification :
The widht : 50mm,100mm,150mm,200mm,250mm etc. Construction Wire Mesh Standard Specification: * 4” wall - 16” wall
* Other widths available on special request
* (S) Standard: 9 ga. side rods x 9 ga. cross rods
* (EH) Extra Heavy: 3/16” side rods x 9 ga. cross rods
* (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods*Tensile Strength - 80,000 psi
*Yield Point - 70,000 psi ITEMS # | Block width | Mesh width | Weight(KGS) | PACKING | QJM2 | 4'' | 2'' | 0.57 | 50PCS/BDL,20BDL/PALLET | QJM4 | 6'' | 4'' | 0.61 | 50PCS/BDL,20BDL/PALLET | QJM6 | 8'' | 6'' | 0.64 | 50PCS/BDL,20BDL/PALLET | QJM8 | 10'' | 8'' | 0.68 | 50PCS/BDL,20BDL/PALLET | QJM10 | 12'' | 10'' | 0.71 | 50PCS/BDL,20BDL/PALLET |
Standard Length | Width | Finishes | 10’(3.05m) | 2”(50mm) | UncoatedElectro GalvanizedHot Dipped Galvanized After FabricationStainless Steel | | 4”(100mm) | | | 6”(150mm) | | | 8”(200mm) | | | 10”(250mm) | | All products conform to:
ASTM A641 - (Electro galvanized )
ASTM A153 Class B2 - (Hot dipped after fabrication)
ASTM A 82 - (Cold drawn steel wire)
Tensile Strength:80,000 PSI;Yield Point:70,000 PSI
minimum;Reduction of Area:30 %.
ASTM A951-96 - (Masonry wall reinforcing)
ASTM 580 Type 304 - (Stainless steel) |
Truss Type Block Reinforcement Mesh SpecificationReference | Width (mm) | Thickness (mm) | Length (mm) | Material | TM 50 S | 50 | 3/4/5 | 3000 | Galvanised steel | TM 100 GS | 100 | 3/4/5 | 3000 | Galvanised Steel | TM 150 GS | 150 | 3/4/5 | 3000 | Galavanised Steel | TM 200 GS | 200 | 3/4/5 | 3000 | Galavanised steel | TM 50 SS | 50 | 3/4/5 | 3000 | Stainless steel | TM 100 SS | 100 | 3/4/5 | 3000 | Stainless steel | TM 150 SS | 150 | 3/4/5 | 3000 | Stainless steel | TM 200 SS | 200 | 3/4/5 | 3000 | Stainless Steel |
Ladder Type Block Reinforcement Mesh SpecificationReference | Width (mm) | Thickness (mm) | Length (mm) | Material | LM 50 GS | 50 | 3/4/5 | 3000 | Galvanised steel | LM100 GS | 100 | 3/4/5 | 3000 | Galvanised steel | LM 150 GS | 150 | 3/4/5 | 3000 | Galvanised steel | LM 200 GS | 200 | 3/4/5 | 3000 | Galvanised Steel | LM 50 SS | 50 | 3/4/5 | 3000 | Stainless steel | LM 100 SS | 100 | 3/4/5 | 3000 | Stainless Steel | LM 150 SS | 150 | 3/4/5 | 3000 | Stainless steel | LM 200 SS | 200 | 3/4/5 | 3000 | Stainless Steel |
Construction Wire Mesh Packing : 1. 50 pieces per bundle, 20 bundles per pallet. (North America
market)2. 25 pieces per bundle, 40 bundles per pallet. (Europe market) Construction Wire Mesh Benifits: Advantages Economy: The mode of truss is reasonable with low price
and has an obvious advantage in this area; Can be designed as
double-sides deck.
Convenient: Shorten the project construction time; Reduce temporaty
support.
Security: Good performance of cracking resistance and fire
resistance;
Reliability: good property to prevent earthquake. Construction Wire Mesh Application: Concrete slabbing, roads, paving, foundations, marine work, bank
strong rooms, partition slabs, concrete block work, asphalt
guttering and so on1. steel truss applied to precast slabs, pre-high-speed railway
sleeper.
2. Used in many high-rise, ultra- high-rise steel buildings
3. Used for steel building, mezzanine floor of “LOFT”
4. The force applied to the complex, special-shaped structure,
building
5. Used in-situ concrete structure(RC) buildings
6. Used in the construction of slope roof structure |
