foundations 9 Gauge Wire Diameter Hot dipped after fabrication
Construction Wire Mesh Construction Wire Mesh Introduction: Ladder Mesh is a prefabricated reinforcement for embedment in the
horizontal mortar joints of masonry.It is manufactured in 10′ 8″ lengths from wire conforming to ASTM A
82 / A82M for cold drawn steel wire.It consists of two or more parallel and deformed longitudinal wires
welded to a perpendicular cross wire spaced 16″ O.C. Out-to-out
spacing is approximately two inches less than the nominal thickness
of the wall. MATERIAL : Iron wire & stainless steel wire 304/316 Qijie metal joint reinforcement products conform to: ASTM A951 (Standard Specification for Steel Wire for Masonry Joint Reinforcement) Our products pass the testing of ASTM A951,We tested in USA . Tensile Strength - 80,000 p.s.i. | Yield Point - 70,000 p.s.i.
minimum Zinc Coating: Mill Galvanized coating: (0.1 oz/ft²) Hot-Dip Galvanized after fabrication: (1.5 oz/ft²) Wire Diameter: 9 gauge or 3/16”Ø Side Rods and Cross Rods available in any combination of the above. Cross Rods welded 16” O.C. Block Size: Standard Sizes: 4” wall - 16“ wall. Other widths available on special request.
MATERIAL : Iron wire & stainless steel wire 304/316 Qijie metal joint reinforcement products conform to: ASTM A951 (Standard Specification for Steel Wire for Masonry Joint Reinforcement) Our products pass the testing of ASTM A951,We tested in USA . Tensile Strength - 80,000 p.s.i. | Yield Point - 70,000 p.s.i.
minimum Zinc Coating: Mill Galvanized coating: (0.1 oz/ft²) Hot-Dip Galvanized after fabrication: (1.5 oz/ft²) Wire Diameter: 9 gauge or 3/16”Ø Side Rods and Cross Rods available in any combination of the above. Cross Rods welded 16” O.C. Block Size: Standard Sizes: 4” wall - 16“ wall. Other widths available on special request. Construction Wire Mesh Standard Specification: * 4” wall - 16” wall * Other widths available on special request * (S) Standard: 9 ga. side rods x 9 ga. cross rods * (EH) Extra Heavy: 3/16” side rods x 9 ga. cross rods * (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods*Tensile Strength - 80,000 psi *Yield Point - 70,000 psi ITEMS # | Block width | Mesh width | Weight(KGS) | PACKING | QJM2 | 4'' | 2'' | 0.57 | 50PCS/BDL,20BDL/PALLET | QJM4 | 6'' | 4'' | 0.61 | 50PCS/BDL,20BDL/PALLET | QJM6 | 8'' | 6'' | 0.64 | 50PCS/BDL,20BDL/PALLET | QJM8 | 10'' | 8'' | 0.68 | 50PCS/BDL,20BDL/PALLET | QJM10 | 12'' | 10'' | 0.71 | 50PCS/BDL,20BDL/PALLET |
Standard Length | Width | Finishes | 10’(3.05m) | 2”(50mm) | UncoatedElectro GalvanizedHot Dipped Galvanized After FabricationStainless Steel | | 4”(100mm) | | | 6”(150mm) | | | 8”(200mm) | | | 10”(250mm) | | All products conform to: ASTM A641 - (Electro galvanized ) ASTM A153 Class B2 - (Hot dipped after fabrication) ASTM A 82 - (Cold drawn steel wire) Tensile Strength:80,000 PSI;Yield Point:70,000 PSI
minimum;Reduction of Area:30 %. ASTM A951-96 - (Masonry wall reinforcing) ASTM 580 Type 304 - (Stainless steel) |
Truss Type Block Reinforcement Mesh SpecificationReference | Width (mm) | Thickness (mm) | Length (mm) | Material | TM 50 S | 50 | 3/4/5 | 3000 | Galvanised steel | TM 100 GS | 100 | 3/4/5 | 3000 | Galvanised Steel | TM 150 GS | 150 | 3/4/5 | 3000 | Galavanised Steel | TM 200 GS | 200 | 3/4/5 | 3000 | Galavanised steel | TM 50 SS | 50 | 3/4/5 | 3000 | Stainless steel | TM 100 SS | 100 | 3/4/5 | 3000 | Stainless steel | TM 150 SS | 150 | 3/4/5 | 3000 | Stainless steel | TM 200 SS | 200 | 3/4/5 | 3000 | Stainless Steel |
Ladder Type Block Reinforcement Mesh SpecificationReference | Width (mm) | Thickness (mm) | Length (mm) | Material | LM 50 GS | 50 | 3/4/5 | 3000 | Galvanised steel | LM100 GS | 100 | 3/4/5 | 3000 | Galvanised steel | LM 150 GS | 150 | 3/4/5 | 3000 | Galvanised steel | LM 200 GS | 200 | 3/4/5 | 3000 | Galvanised Steel | LM 50 SS | 50 | 3/4/5 | 3000 | Stainless steel | LM 100 SS | 100 | 3/4/5 | 3000 | Stainless Steel | LM 150 SS | 150 | 3/4/5 | 3000 | Stainless steel | LM 200 SS | 200 | 3/4/5 | 3000 | Stainless Steel |
Construction Wire Mesh Packing : 1. 50 pieces per bundle, 20 bundles per pallet. (North America
market)2. 25 pieces per bundle, 40 bundles per pallet. (Europe market) Construction Wire Mesh Benifits: Greatly reduces cracking that can arise from thermal stresses. This
enhances resistance to water penetration, as cracks are controlled.* Increases lateral flexural strength.* Bonds exterior and interior masonry wythes together in composite
or cavity walls. Also bonds masonry at intersecting walls and
corners* Increases elasticity and performance of masonry walls under
various stresses Construction Wire Mesh Application: Concrete slabbing, roads, paving, foundations, marine work, bank
strong rooms, partition slabs, concrete block work, asphalt
guttering and so on
|