Wall Construction ASTM A951 Standard Wire Diameter 3/16" Masonry
wall reinforcing Masonry wall reinforcing Introduction: Masonry wall reinforcing is also named Block Truss Wire Mesh, Masonry Reinforcement Mesh. It
is widely used in the building construction area, normally used in
the wall and bridge reinforcement. Masonry horizontal joint
reinforcement mesh include ladder-type and truss type. Ladder type
reinforcements are designed to be embedded in the horizontal mortar
joints of masonry walls. It consists of two parallel side rods with
cross rods welded at 16” (400 mm) O. C., thus forming a ladder
configuration. Overall measurement (side-to-side rod) is
approximately 2” (50 mm) less than the nominal wall thickness.truss
type reinforcement designed to be embedded masonry wall. It
consists of 2 side-rods welded to a continuous diagonal formed
cross-rod forming a truss design with alter nating welds not
exceeding 8” (200 mm) O. C. overall. For use in single-wythe walls. Masonry Reinforcement Mesh is a prefabricated reinforcement for
embedment in the horizontal mortar joints of masonry.It is manufactured in 10′ 8″ lengths from wire conforming to ASTM A
82 / A82M for cold drawn steel wire.It consists of two or more parallel and deformed longitudinal wires
welded to a perpendicular cross wire spaced 16″ O.C. Out-to-out
spacing is approximately two inches less than the nominal thickness
of the wall. MATERIAL : Iron wire & stainless steel wire 304/316 Qijie metal joint reinforcement products conform to: ASTM A951 (Standard Specification for Steel Wire for Masonry Joint Reinforcement) Our products pass the testing of ASTM A951,We tested in USA . Tensile Strength - 80,000 p.s.i. | Yield Point - 70,000 p.s.i.
minimum Zinc Coating: Mill Galvanized coating: (0.1 oz/ft²) Hot-Dip Galvanized after fabrication: (1.5 oz/ft²) Wire Diameter: 9 gauge or 3/16”Ø Side Rods and Cross Rods available in any combination of the above. Cross Rods welded 16” O.C. Block Size: Standard Sizes: 4” wall - 16“ wall. Other widths available on special request.
Masonry wall reinforcing Standard Specification: * 4” wall - 16” wall * Other widths available on special request * (S) Standard: 9 ga. side rods x 9 ga. cross rods * (EH) Extra Heavy: 3/16” side rods x 9 ga. cross rods * (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods*Tensile Strength - 80,000 psi *Yield Point - 70,000 psi ITEMS # | Block width | Mesh width | Weight(KGS) | PACKING | QJM2 | 4'' | 2'' | 0.57 | 50PCS/BDL,20BDL/PALLET | QJM4 | 6'' | 4'' | 0.61 | 50PCS/BDL,20BDL/PALLET | QJM6 | 8'' | 6'' | 0.64 | 50PCS/BDL,20BDL/PALLET | QJM8 | 10'' | 8'' | 0.68 | 50PCS/BDL,20BDL/PALLET | QJM10 | 12'' | 10'' | 0.71 | 50PCS/BDL,20BDL/PALLET |
Standard Length | Width | Finishes | 10’(3.05m) | 2”(50mm) | UncoatedElectro GalvanizedHot Dipped Galvanized After FabricationStainless Steel | | 4”(100mm) | | | 6”(150mm) | | | 8”(200mm) | | | 10”(250mm) | | All products conform to: ASTM A641 - (Electro galvanized ) ASTM A153 Class B2 - (Hot dipped after fabrication) ASTM A 82 - (Cold drawn steel wire) Tensile Strength:80,000 PSI;Yield Point:70,000 PSI
minimum;Reduction of Area:30 %. ASTM A951-96 - (Masonry wall reinforcing) ASTM 580 Type 304 - (Stainless steel) |
Truss Type Block Reinforcement Mesh SpecificationReference | Width (mm) | Thickness (mm) | Length (mm) | Material | TM 50 S | 50 | 3/4/5 | 3000 | Galvanised steel | TM 100 GS | 100 | 3/4/5 | 3000 | Galvanised Steel | TM 150 GS | 150 | 3/4/5 | 3000 | Galavanised Steel | TM 200 GS | 200 | 3/4/5 | 3000 | Galavanised steel | TM 50 SS | 50 | 3/4/5 | 3000 | Stainless steel | TM 100 SS | 100 | 3/4/5 | 3000 | Stainless steel | TM 150 SS | 150 | 3/4/5 | 3000 | Stainless steel | TM 200 SS | 200 | 3/4/5 | 3000 | Stainless Steel |
Ladder Type Block Reinforcement Mesh SpecificationReference | Width (mm) | Thickness (mm) | Length (mm) | Material | LM 50 GS | 50 | 3/4/5 | 3000 | Galvanised steel | LM100 GS | 100 | 3/4/5 | 3000 | Galvanised steel | LM 150 GS | 150 | 3/4/5 | 3000 | Galvanised steel | LM 200 GS | 200 | 3/4/5 | 3000 | Galvanised Steel | LM 50 SS | 50 | 3/4/5 | 3000 | Stainless steel | LM 100 SS | 100 | 3/4/5 | 3000 | Stainless Steel | LM 150 SS | 150 | 3/4/5 | 3000 | Stainless steel | LM 200 SS | 200 | 3/4/5 | 3000 | Stainless Steel |
Masonry wall reinforcing Feature : * Greatly reduces cracking that can arise from thermal stresses.
This enhances resistance to water penetration, as cracks are
controlled.* Increases lateral flexural strength.* Bonds exterior and interior masonry wythes together in composite
or cavity walls. Also bonds masonry at intersecting walls and
corners* Increases elasticity and performance of masonry walls under
various stresses(1)Light in weight ,high intensity, huge loading capacity as well
as good anti-earthquake capacity.
(2)Simple in construction operation, easy to install.
(3)Can act as a part of the structure of weight bearing, to reduce
the cost of material.
(4)Put the panel above the welded wire net fill cement between
them.
(5)This type of floor decking sheet has the strong friction between
the concrete and floor slab, being fire resistant.
(6)This deck is connected with steel bar ,making it have the higher
strength.Masonry wall reinforcing Application: Concrete slabbing, roads, paving, foundations, marine work, bank
strong rooms, partition slabs, concrete block work, asphalt
guttering and so on 1. steel truss applied to precast slabs, pre-high-speed railway
sleeper.
2. Used in many high-rise, ultra- high-rise steel buildings
3. Used for steel building, mezzanine floor of “LOFT”
4. The force applied to the complex, special-shaped structure,
building
5. Used in-situ concrete structure(RC) buildings
6. Used in the construction of slope roof structure
|