Single Pin ESE Lightning Ground Rod Customizable GB50057-2010
|
Single Pin ESE Early Streamer Emission , Lightning Ground Rod GB50057-2010
Product Description Early electro-discharge lightning protection 1, Early electro-discharge time is about 30 subtle 2, The protection radius of the common lightning rod is several
times larger than that of ordinary lightning conductor,The same
installation height. 3, It consists of three systems, Double instantaneous
electro-discharge device, don't have to maintain, There is no
aging.
Lightning rod installation After the lightning rod components are assembled, fastened with bolts or welding methods, the lightning rod as a whole fixed in the base. 1, the installation of lightning rod should be connected reliably. 2, after installation is complete, lightning rod each connection or metal surface coating damage, should do rust-proof treatment.
Fourth, the lightning rod maintenance Lightning rod into use, the annual thunderstorm season before the following content to check. (1) lightning rod connection parts of the connection should be reliable, do not allow loose. (2) check the lightning rod receiver to the base of the total resistance value ≤ 5Ω. (3) lightning rod should be grounded through the lead wire (dedicated or borrowed), grounding resistance value ≤ 10Ω. Packing & Delivery
|
| Product Tags: Single Pin ESE Lightning Ground Rod Customizable Lightning Ground Rod |
|
HAMMOND Stainless Steel Lightning Conductors On Houses ESE Type |
|
200KA SUS 304 Lightning Protection Rod , Early Streamer Emission System |
|
HAMMOND SS304 Lightning Rod System For House , Active Lightning Rod |
|
ISO9001 Q345 Steel Lightning Protection Rod , Lightning Rod Tower For Wind Power Stations |
|
Residential Protective Lightning Rod Protection System 200KA |
|
ESE Early Silver Color Lightning Protection Rod Customizable Length |