Nanotech Water Based Acrylic Coating Anti Corrosion 10L
|
Anti Corrosion 10L Nanotech Water Based Acrylic CoatingProduct Description
Product FeaturesDSAN anti-icing coating is super hydrophobic, super oleophobic,
super self-cleaning, super hydrophobic (oil) in high temperature
environment, etc. Its unique natural light energy absorption
characteristics make the coating delay icing in natural
environment, reduce the amount of icing and easy to de-ice. Barrier coatingsBarrier coatings form a protective non-porous layer over a substrate that prevents the surrounding environment from affecting the base metal. If a barrier coating is applied to the base metal without any other coating or film and is damaged by impact or chemical attack, the substrate is then unprotected. Film thickness and solid content significantly affect the lifespan of the protection.
Inhibitive coatingsInhibitive porous coatings form a passive layer on a substrate that reacts with metal and humidity as it penetrates the film. The corrosion protection offered by inhibitive coatings significantly reduces over time and is why these coatings are regularly used in primers that are overcoated.
Sacrificial coatingsSacrificial coatings act as an additive over a substrate which sacrificially corrodes to protect the material below. Unlike barrier coatings, sacrificial coatings remain effective if the film is damaged, however the level of protection offered is dependent on the additive content level and type of paint binder used.
Important anti-corrosion coating considerationsWhen looking to choose a suitable partner for your anti-corrosion coating requirements it is important to check for several factors: – Are barrier, inhibitive and sacrificial coatings all available? – Is a Norsok approved inspector available if required? – Is there suitable technical support to understand your challenge and recommend the best type of anti-corrosion coating? – Does the potential supplier have the flexible capacity to cope with your volumes and process within your timescales? – Are there sufficient facilities to cope with the size and geometry of your components?
udgment standard of the result after spraying 1) Appearance inspection: The coating should be smooth and flat,
with consistent color, no pinholes, bubbles, flaking and other
defects, check with a 5-10 times magnifying glass, no microporous
qualified. 2) Coating thickness inspection: measured by thickness gauge, the
coating thickness should be uniform, and the coating thickness and
number of layers should meet the design requirements. 3) Adhesion check: check the adhesion of the coating by forking
method, no peeling off phenomenon |
| Product Tags: 10L Anti Corrosion Acrylic Coating Nanotech Acrylic Coating |
|
Translucent White Liquid Anti Corrosion Coating For Boat Paint |
|
10L Nanotech Water Based Coating , Corrosion Resistant Paint Protective Top Coating |
|
Anti Fouling Nano Anti Corrosion Coating , Hydrophobic Paint Coating For Building |
|
Nanotech Water Based Acrylic Coating Anti Corrosion 10L |
|
10L Matte Hydrophobic Anti Corrosion Coating Fast Insulation |
|
10L Nanotech Water Based Coating , Corrosion Resistant Paint Protective Top Coating |