Black 0090019385 NCR Flat Flex Conveyor Belt Upper For Transport

• NCR ATM Personas86 / 5886 installing 

Mandatory Modifications To Plinth Or Floor 1 The following modifications must be made to the plinth: Concrete Plinth 1 If a concrete plinth is used at installation, a section of the plinth should be cut-out to allow the cables which enter the base of the ATM to be fitted. Adjustable Plinth 1 If an adjustable plinth is used, holes should be drilled through the plinth, to allow the cables which enter the base of the ATM to be fitted. ATM installed directly on to the Floor 1 If the ATM is installed directly on to the floor, without a plinth, the cabling must be routed through a channel in the floor. The following illustrations show the size of cut-out required for all security enclosure options. Note: If a channel needs to be cut through the floor, this area must be larger to allow the cabling to be routed along the floor and under the ATM,The ATM must be installed on a floor capable of supporting the maximum weight. Only the maximum weight should be considered as additional options may be added after installation: ● CEN Grade III, CEN IV or Spanish Special Security enclosures: ● Maximum weight: 890 kg (1962.1 lb.) ● Floor loading: 1295 kg/m2 (265.3 lb./ft2 ) ● Standard Security enclosure (UL): ● Maximum weight: 662.6 kg (1460.8 lb.) ● Floor loading: 964 kg/m2 (197.5 lb./ft2 ).