Polished CuBe2 Strips On Coil 0.10x8mm 0.35x8mm MTC 3.1 Certificate

CuBe2 Strips on Coil 0.10x8mm, 0.35x8mm With MTC 3.1 Certificate

Product Normal Description:

Product Name: Strips

Quality: CuBe2, DIN. 2.1247

Certificate: MTC 3.1

Product Specification: 0.1x8mm, 0.35mmx8mm

State: Half hard rolled

Product Brand: CUBERYLLIUM®

Chemical Composition of CuBe2 Alloys:

Temper Designations of CuBe2 Strip:

Tipical Uses of CuBe2 Alloys:

Oil & Gas - Instrument Housings, Flex Shafts, MWD & LWD Components, Bearings, Bushings, Valve Components, Pump Shafts

Automotive - Plastic Molds, Electronic Components, RWMA Tooling

Electrical - Spring Connectors, Current Carring Navigational Instruments, Contact Bridges, Clips, Relay Parts, Electrical Switch and Relay Blades

Aerospace - Landing Gear Bushings, Aircraft Components, Cryogenics

Fasteners - Bolts, Screws, Retaining Rings, Lock Washers, Belleville Washers, Roll Pins, Fasteners, Washers

Other Industrial - Flexible Metal Hose, Non Sparking Safety Tools, Shafts, Pump Parts, Rolling Mill Parts, Bearings, Bushings, Valve Seats, Valve Stems, Wear Plates on Heavy Equipment, Springs, Electrochemical

Specifications of CuBe2 Alloys:

Product Photo of CuBe2 Strips:

Excellent Properties of CuBe2 Alloys:

Key Technology of Beryllium Copper(Heat treatment)

Age Hardening

Age hardening significantly enhances the material’s strength. This reaction is generally carried out at temperatures between 260°C and 540°C depending on alloy and desired characteristics. This cycle causes the dissolved beryllium to precipitate as a beryllium rich (gamma) phase in the matrix and at the grain boundaries. It is the formation of this precipitate which causes the large increase in material strength. The level of mechanical properties attained is determined by the temperature and time at temperature. It should be recognized that beryllium copper has no room temperature aging characteristics.