HDA436T DIGITAL OUTPUT DYNAMIC TILT SENSOR.pdf
PRODUCT DESCRIPTION
HDA436T A new generation of digital MEMS dynamic tilt sensor.It can
measure the attitude parameters (roll, pitch, and azimuth) of a
moving carrier,and suitable for tilt angle measurement under motion
or vibration.HDA436T has a built-in high-precision acceleration and
gyro sensor,and integrates the Kalman filter algorithm ,which can
measure the real-time motion data of the carrier under motion or
vibration.The signal output modes such as RS485 / RS232 /TTL are
optional,and the scalability is strong.
This product adopts non-contact measuring principle ,which can
output the current attitude and inclination in real time.It is
simple to use and does not need to retrieve the relative changes of
the two surfaces.Internally integrated high-precision AD and
high-precision gyro units to compensate for non-linear,orthogonal
coupling,temperature drift and centrifugal acceleration in real
time;greatly eliminate centrifugal errors caused by motion
acceleration interference, improve product dynamic measurement
accuracy;adapt to long-term complex movements Work in places and
harsh environments.The product is a dynamic and static dual-mode
measurement sensor with strong resistance to external
electromagnetic interference.It is suitable for all kinds of
large-scale and high-strength shock and vibration industrial
environments ,and is an ideal choice for industrial automation
control and measurement of attitude.
MAIN FEATURES
- Range (Roll angle ±180°,pitch angle ±90°,azimuth angle ±180°)
- Roll&Pitch Dynamic accuracy:±0.1°
- RS485/232/TTL output Optional
- Wide temperature operation -40 ~+85℃
- Static accuracy:±0.05°
- DC 9~6V wide voltage input
- IP67/IP68 Protection level Optional
APPLICATION FIELD
- High vibration impact gravel equipment
- Railway locomotive monitoring
- Satellite communication vehicle attitude detection
- Shield pipe jacking application
- Shield pipe jacking application
- Geological equipment tilt monitoring
- Underground drilling rig attitude navigation
- Ship navigation attitude measurement
- Orientation measurement based on inclination angle
- Oil drilling equipment
- Various engineering machinery inclination measurement
SPECIFICATIONS
|
| - | Roll±180°, pitch±90°, azimuth±180° (initial value at power-down is
0°) |
| - | X axis / Y axis / Z axis |
| - | ± 0.05° |
| @25℃ | ± 0.1° |
| - | ±250°/s |
| - | 8.5°/h |
| - | 0.25°/sqrt(h) |
| - | ±8g |
| - | 0.1mg |
| - | 0.005mg |
| - | 0.005m/s/sqrt(h) |
| -40～85℃ | ±0.01°/℃ |
| -40～85℃ | ≤100ppm/℃ |
| ≤3.5S |
| 0.01S |
| RS485/RS232/TTL |
| According to EN61000 and GBT17626 |
| ≥ 98000 hours / time |
| ≥100 Megohm |
| 100g @ 11ms,3 axial direction (half sinusoid) |
| 10grms / 10～1000Hz |
| Standard IP67, optional IP68 and corrosion-resistant IP68
protection level |
| Standard shell ≤ 165g, IP68 shell ≤ 510g (including 1m cable) |
|
