AGV RS485 Angular Mems Sensor Platform Anti Interference
|
Detailed Product Description
high reliable Industry Grade MEMS Angular Rate Sensor for AVG Vehicle Using
Reborn , Core upgrade
|
TL740D | |
Mesuring range | Azimuth Angle (±180) |
Acquisition bandwidth (Hz) | >100 |
Resolution(°) | 0.01 |
Azimuth accuracy (°/min) | <0.1 |
Nonlinear | 0.1% of FS |
Max angle rate (°/s) | ≥150 |
Accelerometer range (g) | ±4 |
Acceleroemter resultuion(g) | 0.001 |
Acceleroemter accuracy(mg) | 5 |
Starting time(s) | 30(Static) |
Input Voltage(V) | +9~36V |
Current (mA) | 60(12V) |
Working Temp.(℃) | -40 ~ +85 |
Storage Temp(℃) | -40 ~ +85 |
Starting time(s) | 5(Static) |
Vibration(g) | 5g~10g |
Impact(g) | 200g pk,2ms,½sine |
Working life | 10 years |
Output rate | 5Hz,15Hz,25Hz,50Hz can set |
Output signal | RS232 or RS485 |
MTBF | ≥50000 hours /times |
Insulation resistance | ≥100 Megohm |
Impact resistance | 100g@11ms,3Times/Axis(half sinusoid) |
Anti-vibration | 10grms,10~1000Hz |
Protecting | IP67 |
Connector | matched with 1m cable |
Weight | 152g(without cable) |
Ordering information
TL740D-232 | RS232 output mode |
TL740D-485 | RS485 output mode |
2. The installation of the instrument should be kept parallel to
the surface of the measured object, and reduce the influence of the
dynamic and acceleration on the angle meter. Incorrect installation
will lead to measurement errors, with particular attention to
"surface" and" line "
1)The mounting surface of the instrument fixing must be close,
smooth and stable with the measured surface. If the mounting
surface is not smooth, the angle error of angle measurement can be
caused easily. See figure Pic.AB
2)The axis of the instrument must be parallel to the axis of
measurement, and the two axis should not be included angle as far
as possible , see figure Pic.CD
5. After the switch is started, the angular gyro sensor needs to be
static 20S, and the initial value of the measuring unit is
restored, so as to ensure the measurement precision of the product.
If there is no such operation, the product can also be used
normally, but can not reach the normal precision standard .
Related Products
|
TL735G 3 Axis Angle Alignment MEMS Sensor For High Voltage Switch |
|
TL735G 5G Antenna Three Axis Billboards Inclination Sensor Angle Meter |
|
152g 3 Axis Angular Sensor Azimuth TL720D MODBUS Attitude Algorithm |
|
TL725D IP67 MEMS Angle Sensor For Digital Farming Machinery |
|
36V RS485 MEMS Gyroscope Sensor 100Hz Gyro Heading Sensor For Auto Drive |
|
12V MEMS Three Axis RS232 Angular Speed Measure For Farm Vehicle |
Email to this supplier