TL725D RS232 / RS485 ANGULAR RATE SENSOR FOR AUTOMATIC AGRICULTURAL MACHINERY

● PRODUCTION INSTALLATION NOTES

1.The installation surface of the angle instrument should be kept parallel to the measured target surface and the influence of dynamic and acceleration on the angle instrument should be reduced. Incorrect installation can cause measurement error, Pay particular attention to 1 "face" and 2 "lines ":1)The mounting surface and the measured surface must be fixed tightly, flat and stable. If the mounting surface is uneven, it is easy to cause the angle error of the IMU gyro measurement.

2)The angle axis must be parallel to the measured axis, and the two axes can not produce an angle.

2.Do not shake the product violently during use, avoid violent vibration during use, and stay away from the source of vibration (if unavoidable, please install a shock absorber), so as not to affect the product measurement accuracy;

3.During use, try to avoid movements with angular velocity greater than 300°/s, such as rapid acceleration, sudden stop, and sharp turning, so as not to affect the product measurement accuracy.