SCA116 Mems Dual Axis Digital Inclinometer CAN2.0A High Precision
For Construction
▶ PARAMETERS
| SCA116&126T C2 | CONDITION | PARAMETER | UNIT |
| Measure range | | ±10 | ±30 | ±60 | ±90 | ° |
| Measure axis | | X/XY | X/XY | X/XY | X/XY | Axis |
| Resolution | | 0.01 | 0.01 | 0.01 | 0.01 | ° |
| Absolute accuracy | @25℃ | 0.05 | 0.05 | 0.05 | 0.08 | ° |
| Long term stability | | 0.05 | 0.05 | 0.05 | 0.05 | ° |
| Zero Temp. coefficient | -40～85℃ | ±0.006 | ±0.006 | ±0.006 | ±0.006 | °/℃ |
| Sensitivity temp.coefficient | -40～85℃ | ≤100 | ≤100 | ≤100 | ≤100 | ppm/℃ |
| Power-on start time | | 0.5 | 0.5 | 0.5 | 0.5 | S |
| Response time | | 0.02 | 0.02 | 0.02 | 0.02 | s |
| Output rate | 5Hz,15Hz,35Hz,50Hz can be set |
| Output signal | CAN2.0A |
| EMC | According to EN61000 and GBT17626 |
| MTBF | ≥50000 hours/times |
| Insulation Resistance | ≥100 MΩ |
| Impact resistance | 100g@11ms, 3 Axial Direction (Half Sinusoid) |
| Anti-vibration | 10grms,10～1000Hz |
| Protection grade | IP67 |
| Cables | standard configuration: 1 meter wearproof,grease proofing,wide temperature,Shielded
cables 4*0.4mm2 |
| Weight | 140g(exclude cable) |
* This performance parameter only lists ± 10 °, ± 30 °, ± 60 °, ±
90 ° series as a reference, for other measurement ranges, please
refer to the most adjacent parameters.
▶ INTRODUCTION
SCA116T & SCA126T is a CAN2.0A output single and dual axis tilt
sensor for industrial field control. It adopts industry standard
isolated CAN transceiver, built-in high-precision A / D
differential converter, and can be measured through a 5th order
filtering algorithm. The sensor outputs the tilt and pitch angle
relative to the horizontal plane.
the temperature drift of the sensor can be corrected according to
the change of the built-in temperature sensor to ensure the high
repeatability of the product in low temperature and high
temperature environments. The output response frequency standard
can be up to 100Hz. If a higher response frequency is required, our
company can customize it according to the user. The product belongs
to a real industrial grade product, with reliable and stable
performance, good scalability, and multiple output options.
Suitable for various harsh industrial control environments.
▶ FEATURES
★ Single and biaxial inclination measurement ★ Range ± 1 ～ ± 90 °
optional
★ DC 9～36V wide voltage input ★ Accuracy: 0.05 °
★ Wide temperature operation -40 ～ + 85 ℃ ★ Resolution 0.01 °
★ High anti-vibration performance> 2000g ★ Direct lead interface
★ Size: L90 × W40 × H26mm ★ Output method: CAN2.0A
▶ APPLICATION
★ Engineering vehicles automatic leveling ★ Bridge & dam
detection
★ Aerial platform vehicle, lifter safety & protection ★ Medical
facilities angle control ★ Underground drill posture navigation ★
Shield pipe jacking application ★ Based on the angle direction
measurement ★ Geological equipment inclined monitoring
★ Mining machinery, oil-well drilling equipment ★ Equipment level
control
★ Alignment control, curve control
★ Directional satellite communications antenna pitching angle
measurement
▶ ELECTRONIC CHARACTERISTICS
| PARAMETERS | CONDITION | MIN | TYPICAL | MAX | UNIT |
| Power supply voltage | standard | 9 | 12,24 | 36 | V |
| | customizable | | 5 | | V |
| Working current | No load | | 40 | | mA |
| Working temp. | | -40 | | +85 | ℃ |
| Store temp. | | -40 | | +85 | ℃ |
