Portable Mobile Laser Welding Marking Cutting Smoke Soldering Dust
Collector Fume Extractor Features - Apply to all kinds fo soot purifications caused by welding,
grinding, as well as recycling of rare metals, precious materials,
etc.
- For the potential of fire and molten slag particles, two protective
measure are used inside purifier, to make it a longer life, more
secure and reliable.
- Power phase sequence instructions, short-circuit protection for
lack of phase, with shutdown protection measures whe too high
temperature.
- With large air volume, low noise and betterr capture effect.
Solution hose uses the real anti-temperature, wear-resistant
compounded materials, without crack and damage to sparks, its life
shorter than the model of intelligent.
- Suction arm uses real temperature-resistant, flame retardant and
wear-resistant composite materials, and will not crack burning
through by spark with longer life.
| Model No. | XL-500 | | GW | 60kg | | Dimension | 550*440*385mm | | Capacity | 700m³/h | | Decibles | 60db | | Power | 450W | | Voltage | 110V/200V |
| Flameproof Grid*1 | 415*335*25mm | | Primary Filter*1 | 450*380*100mm | | HEPA(PP)*2 | 450*380*50mm | | Garbon Filter*2 | 450*380*50mm |
1. The flue gas enters the purifier through the smoking pipe/mouth,
and is firstly guided by the flow equalization plate, so that the
flue gas uniformly passes through the filter layer, and the
pre-filter layer effectively intercepts the larger pollution
particles in the flue gas, thus prolonging the service life of the
main filter.
2. The filter gradient setting of the main filter layer:
low-efficiency filter +HEPA high-efficiency filter. The diameter of
purification particles is 0.3μm, the purification efficiency is
99.99%, and the filter element has a long service life.
3. The gas filter layer selects high-quality columnar activated
carbon particles+molecular sieve, oxidant, etc. for adsorption.
Harmful gases are more thorough. |
