XL-500 Laser Marking Machine 5 Layers Fume Extractor Air Purifier Features - Apply to all kinds fo soot purifications caused by welding,
grinding, as well as recycling of rare metals, precious materials,
etc.
- For the potential of fire and molten slag particles, two protective
measure are used inside purifier, to make it a longer life, more
secure and reliable.
- Power phase sequence instructions, short-circuit protection for
lack of phase, with shutdown protection measures whe too high
temperature.
- With large air volume, low noise and betterr capture effect.
Solution hose uses the real anti-temperature, wear-resistant
compounded materials, without crack and damage to sparks, its life
shorter than the model of intelligent.
- Suction arm uses real temperature-resistant, flame retardant and
wear-resistant composite materials, and will not crack burning
through by spark with longer life.
| Model No. | XL-500 | | GW | 60kg | | Dimension | 550*440*385mm | | Capacity | 700m³/h | | Decibles | 60db | | Power | 450W | | Voltage | 110V/200V |
| Flameproof Grid*1 | 415*335*25mm | | Primary Filter*1 | 450*380*100mm | | HEPA(PP)*2 | 450*380*50mm | | Garbon Filter*2 | 450*380*50mm |
The filtration system is purified with four-stage filter elements.
Modular design, layer by layer protection. Primary, medium,
high-efficiency and gas activated carbon filter elements can be
replaced independently, so the filter elements have longer service
life and lower use cost.
Filter step by step to ensure that harmful smoke and dust are
thoroughly purified. The purification rate of soot with a diameter
of 0.3 microns is as high as 99.9%.
The special activated carbon filter element with catalyst can
adsorb and purify various peculiar smells and toxic and harmful
substances in the air. The universal bamboo pipe smoking arm made of new PP material in
dust collection system can be oriented and positioned at will (the
length can be provided according to the customer's requirements
without external support), and there is no abnormal noise in the
positioning process, with better support, safety and innocuity
(bamboo pipes produced by many recycled materials in the market).
Adopt round and square smoking hood, which conforms to aerodynamic
principle, and has larger smoking area and higher efficiency. |
