Custom Scaffolding Formwork Two Wings Fixed Anchor Nuts
|
Custom Scaffolding Formwork Two Wings Anchor Nut Tie Rod Nut
◆Product Overview
Wing nuts and Tie rods as a whole facility are used widely in formwork construction. There are single wing nut, butterfly wing nut, two anchor wing nut, three anchor wing nut, combination wing Nut. Because of this structure, wing nuts can be easily tightened and loosened by hand without any tools. Wing nuts have casting and forging types by processing technology , common thread size is 17mm/20mmon thread size is 17mm/20mm.
Material usually use Q235 carbon steel, 45# steel, surface finished as galvanized, zinc-plated and natural color. Any specifications’ nuts can be produced according to your requirements.
The Wing Nuts are available in different diameters for different thread bars(Bar Ø15, Ø20), as well as differs from the various pedestal allowing a direct bearing on walings. It can be screwed on or loosened using a hexagon wrench, thread bar or hammer.
◆Product Parameter
◆Product Advantage
1.The structure design is reasonable and simple,Convenient for construction.
2.Withstand high tension and pressure, and work in a stable state.
3.All kinds of tie rod nut support for your choice.
4.The surface treatment is excellent. Available in galvanized, paited or powder coated.
|
||||||||||||||||||||||||||
Product Tags: 170KN fixed anchor nuts scaffolding formwork fixed anchor nuts two wings fixed anchor nuts |
![]() |
16MM Formwork Accessories Wing Nut Scaffolding |
![]() |
Formwork Cast iron Silver Galvanized D22 Tie Rod Nut |
![]() |
HDG International Standard Plate 17mm Tie Rod Nut |
![]() |
Construction Concrete Walls 12mm Tie Rods And Anchor Plates |
![]() |
Formwork Ductile Casted Iron Screw Cone Tie Rod Nut |
![]() |
High strength 90KN Steel Cone 100mm Tie Rod Nut |