Long Stroke 25*51 12W Tubular Push Solenoid

Instructions for use and installation:

1. The power line of the electromagnet is powered on regardless of the positive and negative connection. The input voltage is DC12 V, the current is 1.25a, and the power is 16.9 W;

2. When the switch is connected to the power supply, the push head of the sliding rod at the tail end of the electromagnet is pushed out by 12mm. After the power is cut off, the sliding rod is reset by the internal spring force;

3. Installation dimension diagram:

Product features: the electromagnet is instantaneously energized, so it consumes less power. This electromagnet has simple structure, low cost and convenient installation.