Automobile High And Low Temperature Chamber Formula Constant Wet / Humidity

Browse Categories

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86-18027403449

Contact Person:
Ms.Tessa Huang View Contact Details

Automobile High And Low Temperature Chamber Formula Constant Wet / Humidity

Brand Name	HJ
Model Number	AM0033
Certification	Calibration Certificate(cost additional)
Place of Origin	China
Minimum Order Quantity	1 set
Price	Negotiatable
Payment Terms	T/T, L/C
Supply Ability	10 set /month
Delivery Time	40 days
Packaging Details	Plywood
Humidity range	20%～98%RH
Temperature departure	±2℃
Temperature uniformity	±2℃
Temperature fluctuation	±0.5℃
Heating rate	Approximately 3℃ / min
Humidity deviation	±3.0％RH（＞75％RH）；±5.0％RH（≤75％RH）
Humidity uniformity	± 3.0%RH (no-load)
Humidity fluctuation	± 2.5%RH (no-load)

Detailed Product Description

Formula Constant Wet Constant Humidity / High And Low Temperature Chamber Auto Parts Test Equipment IEC68

Products Introduction:

The test machine is mainly used for electronics, electrical, food, automobile, oak plastics, metal, parts and other products, transportation and materials in high and low temperature hot and humid environment; it is the reliability test equipment for electronics, electrical, electrical, plastic and pipe engineering;Auto Parts Test Equipment

It is especially suitable for the high temperature resistance, low temperature resistance and humidity resistance cycle test of optical fiber, LCD, crystal, inductance, PCB, battery, computers, mobile phones, rubber, plastic and other products;

This machine can simulate different environmental conditions such as high temperature and high humidity / high temperature, low humidity / low temperature / high temperature / low temperature, with easy operation and learning of high accuracy programming control and fixed-point control system, to provide the best test environment.Auto Parts Test Equipment

Meet the standards:

GB-2423.1-2008 (IEC68-2-1) Test A: Low-temperature test method.

GB-2423.2-2008 (IEC68-2-2) Test B: High-temperature test method.

GJB360.8-2009(MIL-STD.202F) High-temperature life test.

GJBl50.3-2009 (M-I L-STD-810D).

GJBl50.4-2009 (MIL-STD-8 I 0 D).Auto Parts Test Equipment

GB2423.3-2008 (IEC68-2-3) Test Ca: constant heat and humidity test method.

GB2423.4-2008 (IEC68-2-30) Test Db: heat heat test method.

GJBl50.9-2009 (MIL-STD-810D) wet-heat test method.Auto Parts Test Equipment

Parameters:

Model	AM0033-HW-80	AM0033-HW-150	AM0033-HW-225	AM0033-HW-408	AM0033-HW-800	AM0033-HW-1000
Inner box size mm (W * H * D)	400×500×400	500×600×500	500×750×600	600×850×800	1000×1000×800	1000×1000×1000
Outer box size mm (W * H * D)	600×1650×1200	700×1760×1545	700×1910×1625	800×2010×1845	1200×2035×1850	1200×2035×2050
Temperature range	A:-20～+150℃ B:-40～+150℃ C:-70～+150℃
Humidity range	20%～98%RH
Temperature departure	±2℃
Temperature uniformity	±2℃
Temperature fluctuation	±0.5℃
Heating rate	Approximately 3℃ / min (nonlinear, no-load)
Cooling rate	Average 1.0℃ / min (non-linear, no-load)
Humidity deviation	±3.0％RH(＞75％RH)；±5.0％RH(≤75％RH)
Humidity uniformity	± 3.0%RH (no-load)
Humidity fluctuation	± 2.5%RH (no-load)
Internal box material	SUS304 stainless steel plate Auto Parts Test Equipment
Outer box material	A3 Cold-rolled steel sheet electrostatic double-sided injection molding / SUS304 stainless steel
Heat insulation material	Hard matter polyurethane foaming
Refrigeration method	Air-cooled type (using the French Taikang fully closed compressor)
Cryogen	R404a,R23
Temperature and humidity sensor	Class A PT100 Platinum resistance
Heater	Nickel-chromium alloy electric heating type heater
Humidifier	External humidification, U-type design plus overtemperature probe hole.
Supply source	220V±10%V/ 380V±10%V；50Hz；
Protection system	Power supply phase deficiency and phase sequence error protection, water shortage automatic alarm protection, leakage protection, heater overtemperature protection, heater short-circuit and other overcurrent protection
Installation environment	Temperature: 2℃ ~30℃; relative humidity: 85%; air pressure: 86kPA~106kPa
	The installation site shall be flat, well ventilated and no strong vibration around the equipment
	There is no strong electromagnetic field influence around the equipment, no flammable, explosive, corrosive substances and dust around the equipment.
	Proper use and maintenance space remains around the equipment

Product Tags: Automobile High And Low Temperature Chamber 98%RH High And Low Temperature Chamber

Related Products


From:	Enter your Email please. Your email is incorrect!
To:	HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

Automobile High And Low Temperature Chamber Formula Constant Wet / Humidity

Automobile High And Low Temperature Chamber Formula Constant Wet / Humidity

ISO3795 Burn Resistance Tester

ISO16750 Ice Water Shock Test Chamber

IPX9K Steam Jet Cleaning Test Chamber

Automobile High And Low Temperature Chamber Formula Constant Wet / Humidity

Water Cooled Auto Parts Test Equipment 380V High And Low Temperature Low Pressure Test Chamber

17.5KW Salt Fog Test Box Auto Parts Test Equipment IEC61701