15L/min Auto Part Test Equipment Antifreeze Vacuum Filling Machine

Auto Part Test Equipment Anti-Rust And Antifreeze Vacuum Filling Machine

Basic Function:

Connect the filling gun on the filling equipment to the filling port of the water tank, start the equipment work switch, and the equipment will automatically vacuumize the cooling pipeline and fill the rust and antifreeze fluid.

The filling gun adopts the dual-channel design of the evacuation channel and the anti-rust and antifreeze channel. The main water tank filling volume is controlled by flow measurement, pressure monitoring and suck back to ensure that the liquid level of the main water tank is consistent every time it is filled; After completion, the operator removes the filling gun. The suction function of the filling gun can prevent the rust and antifreeze from dripping from the gun head. The filling amount of the auxiliary water tank is controlled by a flow meter.

If the liquid in the storage tank is empty, the equipment will automatically replenish liquid from the inlet. If there is no liquid to replenish at the inlet, the equipment will automatically stop and send an alarm signal.

The equipment has two operating modes: automatic/manual. Auto Part Test Equipment

Basic composition of equipment:

The anti-rust and antifreeze liquid vacuum filling equipment consists of a control system, a monitoring system, a vacuum and leak detection device, a filling and sucking device, and an anti-rust and antifreeze liquid automatic extraction and storage device.

Specification: