AC220V Flammability Testing Equipment Touch Screen Operation Glow Wire Tester

Glow Wire Tester Flammability Testing Equipment Touch Screen Operation

Standard of Glow Wire Tester:

IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure;

IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products;

IEC60695-2-12 Fire hazard testing – Part 2-12: Glowing/hot-wire based test methods – Glow-wire flammability index (GWFI) test method for materials;

IEC60695-2-13 Fire hazard testing – Part 2-13: Glowing/hot-wire based test methods – Glow-wire ignitability test method for materials.

Application of Glow Wire Tester:

This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the no flame ignition source fire test to test initiation temperature and flammability index of related glowing filament.

Feature of Glow Wire Tester:

1. Fully automatic, motorized forward & reverse motion of carriage with test specimen.

2. Wire loop Ni/Cr (77:20), 4 mm dia, shaped as specified in standard, mirror polished tip to enable easier cleaning (hole dia. 0,6 or 1,1 mm depending on thermocouple selection). Wire loop is hard soldered to connection discs and easy user replaceable.

3. Thermocouple type K, mineral-insulated, metal-sheathed, fine-wire with an insulated junction, outside diameter 0,5 mm (optional 1 mm), Metal sheath resistant to 1100 deg. C.

Parameter of Glow Wire Tester: