25mm/s Flammability Testing Equipment Fire Hazard Test
|
Flammability Test Chamber Fire Hazard Testing Glow Wire Test Apparatus
Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure, IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products, IEC60695-2-12 Fire hazard testing – Part 2-12: Glowing/hot-wire based test methods – Glow-wire flammability index (GWFI) test method for materials, IEC60695-2-13 Fire hazard testing – Part 2-13: Glowing/hot-wire based test methods – Glow-wire ignitability test method for materials.
Feature: The glow wire test is a method used for characterising the ignition and the flammability of polymers. A heated wire is brought into contact with the surface of the specimen at a specific temperature and for a defined time interval. During the test it is determined whether or not the material ignites within a defined period of time. Furthermore, it is observed whether a potential flame is extinguished or the polymer drips. Flammability Testing Equipment
What is Glow Wire Testing? Historically a number of methods have been developed to evaluate material flammability and fire resistance. These include both direct flame and indirect flame testing methods. An example of the direct flame method is defined in the UL 94 specification. This long accepted test method involves applying a flame directly to a vertically or horizontally mounted specimen under controlled conditions. On the other hand, the indirect flame method features a non-flaming heat source applied to a sample. Glow wire testing is an example of the indirect flame method. Test results from applying these methods provide a way to compare the materials’ tendency to resist ignition, self-extinguish flames (should ignition occur), and to not propagate fire via dripping. To better understand the differences between the direct method and the indirect method, refer to Figure 2. Parameter:
|
||||||||||||||||||||||||||||
Product Tags: Flammability Testing Equipment Fire Hazard Test 25mm/s Flammability Testing Equipment 25mm/s Fire Hazard Test |
![]() |
Glow Wire Tester Flammability Testing Equipment Complies With IEC 60695-2-10 Standard |
![]() |
Needle Flame Tester C60695-1-5 Standard Flame Height 12±1mm Flammability Testing Equipment |
![]() |
NF-2 Needle Flame Tester High Precision Fire Test Equipment IEC60695-11-5 Certification Butane Gas Flame Test |
![]() |
GW-2 Glow Wire Tester IEC 60695-2-12 Certified Flammability Test Equipment 1000℃ High Precision Flame Retardant Tester |
![]() |
IEC60695-2-10 Flammability Testing Equipment |
![]() |
Needle - Flame Flammability Testing Equipment For Fire Hazard Testing 12mm Flame Height |