Aluminium Triplex Overhead Service Drop Cable Polyethylene Or Crosslinked Polyethylene Insulation

Triplex Overhead Service Drop Cable is used to deliver electricity to the user's service head, which is connected to the service entry wire, normally from a transformer installed atop a pole. Use at phase-to-phase voltages of no more than 600 volts and conductor temperatures not to exceed 90°C for crosslinked polyethylene (XLP) insulated conductors or 75°C for polyethylene insulated conductors.

Characteristics of Triplex Overhead Service Drop Cable
1)Rated voltage U0/U :0.6/1 KV
2)Max. permissible long-time working temperature : PVC or PE insulated conductor is not more than 70 ,and that of XLPE insulation is not more than 90 .
3)Installing temperature should not be below -20 .
4)Admissible bending radius to cable :When overall-diameter (D) is less than 25 mm , it should be not less than 4D . When overall diamter(D) is 25mm or more , it should not be less than 6D .
Our overhead insulated cable have formed a system, such as single core, two-core ,three core and four core. There are conductors of aluminium , aluminium alloy or aluminium steel-reinforced . We can manufacture the overhead insulated cable not only in accordance with China`s standard GB12527-90 but also the other standards and special requiement by the custormers. If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.
(Service drop cable)
1. Stranded aluminium conduct
2. PE or XLPE insulation
3. ACSR, AAAC Messenger wire

Packing: wooden drum,weave wrap or according the customer's requirement

Delivery date : according the quantity of PO,usually 3-30 days days after receiving prepayment

Payment: Western Union, T/T, L/C,Alibaba.
Shipping: DHL, UPS,TNT and other courier available as required.