Dentsply XiVE® Implant Internal Titanium Premill Blank 10mm Engaging

Dentsply XiVE® Implant Internal Titanium Premill Blank 10mm Engaging

Dentsply XiVE®

3.0mm/ 3.4mm/ 3.8mm/ 4.5mm/ 5.5mm

Material:
Ti 6AI-4V ELI (Supply from Germany)

Feature:

* Simply efficiency
* Precision machined up to ± 5µm
* Benefit from a faster and controlled turnaround time
* Different diameter available of 10mm, 14mm

Pre-milled Abutment Blanks, you can now produce titanium customised abutments with your milling equipment.
Boost your efficiency by using your milling machines and benefit from all major implant connections.

Approved by CE, ISO 9001, ISO 13485

* We also can provide another 3 type of premill as above picture shown. Welcome to further inquire. Thanks. 

Points of Dentsply Xive® S Dental Implant:

Xive® S implants are machined from grade 2 titanium with a slightly tapered geometry and outside threads. Surface roughening is achieved through a proprietary process called "Friadent® plus". The surface of the implant is grit blasted, followed by immersing the implant in hot acid. A internal hexagon serves as the indexing feature for prosthetic components. The indexing feature dimension differs from implant diameter to implant diameter and prosthetic components are therefore not interchangeable from implant diameter to implant diameter. Five implant diameters in in six possible implant lengths are offered for this implant system. Each implant diameter is color coded for identification. 3.0mm (brown) diameter implants are offered in three lengths of 11, 13 and 15mm. 3.4mm (gray) diameter implant are produced in five lengths of 9.5, 11, 13, 15 and 18mm while 3.8mm (yellow) and 4.5mm (blue) diameter implants are available in six lengths (8, 9.5, 11, 13, 15, 18mm). 5.5mm (red) diameter implants are machined in five lengths of 8, 9.5, 11, 13 and 15mm. The implants are packaged with a pre mounted fixture mount and separate cover screw. Frialit® and Xive® S implants share the same prosthetic components.