Controller for Low-intensity Aviation Light Specification
Power Rated Supply: AC120V(±10%)
Power Rated Frequency: 50HZ—60HZ
Power Consumption: 5W
Ambient Temperature: -40℃～+70℃
Ambient Humidity: ≤95%
IP Standard: IP65
Max load: 5KW
Installation Size: 330mm×130mm×M6
Overall Size: 290mm×245mm×93mm
Anti-wind Ability: 80m/s
Control ablility: 6pcs
Weight: 4.5kg
FAA classify: L-856/857
Function & Features - Can control matched high intensity, medium intensity, low
intensity series obstruction light.
- Steady working, strong ability of anti-interference and
anti-shock.
- Aluminum alloy material, provides lightest body and corrosion
resistance.
- Photocell can switch ON/OFF the light automatically according to the changing of intensity .
- Adjustable mounting hole design, easy to install.
- With surge protection facility
- Digital surveillance function.
- Roar alarm and dry contact alarm function.
Usage notice
- Don't use any out of nominal voltage,or will destroy
equipment.
- Power light and SYV should connect correctly base on color
then electrify, or will destroy lights.
- In order to avoid controller destroy, don't make controller’s output port short circuit
- The load power can’t beyond the range of instruction, or will
cause blowout or controller module
- Any person who install this controller must shut down
controller’s safety lock after finish installing, or will course
water entering or bad effect of personal safety.
- Non-professional workers can not do the device maintenance, so as not to expand the error and be hurt.
Application
Block
Airport
High Mast lamp
Chimney
Telecom towers
High rise building
Dimension Drawing
|
