12AH 2.8W Solar Runway Entrance Light Military Dimming

Description

GS-JC/RK Solar runway entrance light the main shell adopts high weather resistant special plastic material, which can be used in harsh marine environment for a long time, and its service life is more than 3 times that of aluminum alloy material.

LED light source and advanced Fresnel optical lens are used in the interior of the product, and the luminous angle conforms to FAA and CAAC standards. It can send out a one-way green/red light signal at night or during the day with low visibility, clearly marking the direction of the airport runway entrance.

It is suitable for emergency rescue airport, temporary combat readiness airport, all kinds of navigable airport and heliport.

Function & Features

• Integrated structure and detachable base design, easy installation and dis-assembly.
• Built-in integrated solar charging function, with perfect protection circuit, can be used in military radar for a long time.Work stably under radiation and radio radiation.
• It has an easy-to-replace metal easy-to-fold device, the top of the product is equipped with anti-bird needles and the product height does not exceed 250mm.
• An external toggle power switch and reset switch are designed at the bottom of the product.
• Fully sealed structure, and 6 waterproof structure bolts, waterproof performance up to IP68.
• The single-chip microcomputer control circuit combined with the constant current control system has an overall design life of more than 10 years.
• Wireless remote control function, 3 or 5 level dimming function, realize remote control, best with repeater, It can reach more than 20 kilometers.

Specification

Dimension Drawing

Application

Class I,II,III airports, Various General Aviation Airports, Combat Readiness Airports, Heliport

Usage Notice

• Don't use any out of nominal voltage,or will destroy equipment.

• Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
• After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
• Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.