Max Load 5KW SUS304 Shell Obstruction Light Controller

Max Load 5KW SUS304 Shell Obstruction Light Controller

Specification
Model type: GS-OC/Z
Power Rated Supply: AC120V(±10%)
Power Rated Frequency: 50HZ—60HZ
Power Consumption: 3W
Monitoring out put type: dry contact, RS485,RS232
Max load: 5KW
lightning protection grade: Imax(8/20) 40KA
Shell material: SUS304
Overall Size: 400mm x 360mm x 130mm
Installation Size: 330mm×130mm×M6
Sync way: GPS/sync wire
Anti-wind Ability: 80m/s
Ambient temperature: -40℃～70℃
Weight: 12kg
Protection voltage: 275V
Protection grade: IP67

Function & Features

1. Can control matched high intensity, medium intensity, low intensity series obstruction light.
2. Steady working, strong ability of anti-interference and anti-shock.
3. SUS 304 stainless steel cover, provides lightest body and corrosion resistance.
4. Changing the light intensity according to the light intensity of environment
5. With omnibearing surge protection facility
6. Digital monitoring function,It can choose RS485/RS232 monitoring function
7. Roar alarm and dry contact alarm function.
8. It can set any flash rate of obstruction lights by coder
9. Daytime, evening, night 3 kinds of Working mode manual test function
10. External Photocell induction probe function
11. Main/vice controller optional function, when need many lights flash sync, set the controller to be main controller will be ok.
12. Buzzer ON/OFF function, can choose if use buzzer according to different application situation.
13. Kinds of working mode for option, can choose different types of aviation obstruction lights.
14. Lighting working mode statue indicator light
15. Photocell statue indicator light
16. alarm indicator light
17. GPS working indicator light
18. Power indicator ligh
19. E1 power filter,can prevent power interference from destroying Lighting
20. With rich anti-surge protection function, provide efficient protection when lightning shock and overload
21. power-supply module provide many kinds of protection power, It can prevent Controller panel and lighting’s failure expansion when power supply destroy.
22. plug-in mainboard design, convenient for future maintenance
23. Maintenance testing switch, this function,this function only provide for professional person operating when lighting failure, this function is convenient for judging failure at long distance, convenient for future maintenance.

Usage notice

1. Don't use any out of nominal voltage,or will destroy equipment.
2. Power light and SYV should connect correctly base on color then electrify, or will destroy lights.
3. In order to avoid controller destroy, don't make controller’s output port short circuit
4. The load power can’t beyond the range of instruction, or will cause blowout or controller module
5. Any person who install this controller must shut down controller’s safety lock after finish installing, or will course water entering or bad effect of personal safety.
6. Non-professional workers can not do the device maintenance, so as not to expand the error and be hurt.

Application
Buildings
Airports
Chimneys
Bridges
Towers
power towers
communication towers
super high buildings

Dimension Drawing