2000cd Medium Intensity Aviation Obstruction Light
Specification
| FAA Standard: | L-864 |
| Type: | GS-MI/B |
| Power voltage: | AC 110V/220V,DC 12V/24/48V |
| Power Supply Frequency: | 50HZ～60HZ |
| Average power consumption: | ≤20W |
| Flash rate: | Flashing 20~40times/min |
| Continuous working time: | 200ms |
| Light intensity: | ≥2000cd |
| Horizontal Out-put: | 360° |
| Vertical Divergence: | ≥3° |
| Service Life of the Light Source: | ≥20years |
| Emitting Color: | Red |
| Overall Size: | 255mm×255mm×210mm |
| Installation Size: | ￠234mm×M8 |
| IP Protection: | IP68 |
| Optically Controlled Ambient Brightness: | 50/100Lux |
| Ambient Temperature: | -40℃～70℃ |
| Net Weight: | 3.8kg |
| Anti-Wind Ability: | 80m/s |
Features
1. Full sealed structure base, casting by high intensity aviation
aluminum alloy.
2. Special LED chips, with brightness, low power consumption and
long life.
3. PC material cover, provides strong corrosion resistance, UV
resistance, impact resistance.
4. Its lightning protection ability and control circuit with anti
surge protective device that can apply to poor working environment.
5. A variety of work modes can be customized according to
customer’s requirements.
6. Built-in photocell can switch ON/OFF the light at dawn or at
dusk (optional).
Attention / Usage Tips
1. Check whether the supply voltage does comply with the rated
voltage of device.
2. Do not open it if the device is out of operation, in order not
to be hurt by the internal high pressure.
3. Afterfinished the installation, the personnel must check whether
the device is in a good waterproof processing and whether the screw
spikes are tightened.
4. Non-professional workers cannot do the device maintenance, in
order not to expand the error and be hurt.
Application
Block
Airport
High Mast lamp
Chimney
Telecom towers
Bridge
High-rise Buildings
Dimension drawing
