Axis Dro Digital Readout System For Milling Machine Lathe

Plastic Grey Shell 2 Axis Dro Digital Readout System For Milling Machine Lathe

Product Introduction

The EA-926 is hte latest full function readout cabinet series from Easson launched on the year 2020.

The design focus is to maintain the full function and high quality, and try to use the most reasonable low-cost solutions, reducing the price, facing the practical market.

Ultra Low Temperature Rise Transformer

Easson all Digital readout power supply use a linear power transformer and power filter, this can help our products pass by the noice immunity and the EMC.

To reduce the total heat generation inside the DRO in order to obtain long working life. An ultra low temperature rise transformer that construct with very high permeability icron core is used, which effectively bring temperature rise to only about 5℃.

EMC Testing equipment

To Make sure all Easson DRO products can be pass the standard EMC standard specification, we have a complete set of EMC test esd immunity tester equipment for testing the EMC.

Easson DRO have been to conforms to relevant standards for the electromagnetic compatibility ( EMC ) as the details below:

IEC61000-4-2 / GB / T 17799-2: Electrostatic discharge immunity ( Contact discharge 6000V, air discharge 8000V )

IEC61000-4-4 / GB / T 17799-4: Electrical fast transient burst immunity ( pulse amplitude 2000V )

IEC61000-4-5 / GB / T 17799-5: Lightning surge immunity ( Superrimposed pulse voltage peak 2000V )

Aging Test Room

.

All Easson Digital Readout System need to do the aging test, using 3 axis signal generator counting, make sure all couting reading correctly, high temperature test and load test for 72 hours before QC procedure.

Technical Specification

Basic parameter is included as below:

Connector interface